Hi Group, My GS-232B Rotor interface has stopped interfacing. When I issue it a command in terminal mode it returns a load of non standard characters. It will not control the G-5500 from SatPC32.
Does this sound familiar to anyone and is there any way to reset or reprogram this unit? Many thanks in advance. vy 73, John Meeks KC8ZFN
It may have a mis match on the baud setting, mine will do the same if this is wrong.
Paul Luggar
M0SCI
Website WWW.M0SCI.CO.UK
Amsat-UK Member 6484
www.m0sci.co.uk/forum Devon and Cornwalls Amateur Radio Message Board
----- Original Message ----- From: "John Meeks" jmeek@harbor.gaslightmedia.com To: amsat-bb@amsat.org Sent: Sunday, April 08, 2007 2:30 AM Subject: [amsat-bb] Help wigh GS-232
Hi Group, My GS-232B Rotor interface has stopped interfacing. When I issue it a command in terminal mode it returns a load of non standard characters. It will not control the G-5500 from SatPC32.
Does this sound familiar to anyone and is there any way to reset or reprogram this unit? Many thanks in advance. vy 73, John Meeks KC8ZFN
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
participants (2)
-
John Meeks -
Paul Luggar