FL11 in the next SO-50 pass of ~1804z today...
It's Working... !!!
Hi to all, this is CO7WT...
A few hours before I finished of homebrew my cross yagui for satellites... (2m: 3 elements / 70cm: 6 elements) from a design of DK7ZB with 28 ohms feeding...
It's a bit down in freq (SWR of 1.1 in 430 Mhz) but worked fine in the last pass of SO-50 receive only, the 2m yagui is ok on freq...
I will be with a baofeng UV-5R on rx and a FD-268A in tx, so a kind of QRP here...
I have LoTW... see you on the next pass...
73 de CO7WT.
Not working...
I have a strong desense issue... I have to work on that... 73
El 30/11/14 a las 11:40, Pavel Milanes Costa escribió:
It's Working... !!!
Hi to all, this is CO7WT...
A few hours before I finished of homebrew my cross yagui for satellites... (2m: 3 elements / 70cm: 6 elements) from a design of DK7ZB with 28 ohms feeding...
It's a bit down in freq (SWR of 1.1 in 430 Mhz) but worked fine in the last pass of SO-50 receive only, the 2m yagui is ok on freq...
I will be with a baofeng UV-5R on rx and a FD-268A in tx, so a kind of QRP here...
I have LoTW... see you on the next pass...
73 de CO7WT. _______________________________________________ Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
participants (1)
-
Pavel Milanes Costa