Hello
Wondering if someone can help
I am trying to get WISP to track the ISS.
I have updated the keps and wisp says "ISS - added to database"
But any attempt to get it to track says "ISS is not in the database"
Ideas ?
---------------------------------------------------------------------------- Andrew Rich VK4TEC [email protected] http://www.tech-software.net
This sounds like the usual database being full problem. You will have to remove one or more of the unused satellites from your database and then the keps for ISS will get installed.
Reid, W4UPD
Andrew Rich wrote:
Hello
Wondering if someone can help
I am trying to get WISP to track the ISS.
I have updated the keps and wisp says "ISS - added to database"
But any attempt to get it to track says "ISS is not in the database"
Ideas ?
Andrew Rich VK4TEC [email protected] http://www.tech-software.net
Sent via [email protected]. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
Another must do, is shut wisp down and start it up again for new keps to work.
Not doing that has caught me out. Why ? I have no idea.
73, Dave.
In addition to my last and what's been said by Reid, to save having the data base filled with information you don't need, edit the Kepler file before you ask WiSP to read it.
Dave.
I just cut down to a simple tle, with just ISS in it.
wisp said "added to database"
When i browse the database, there is nothing in the 1 - 50 odd satellite - they are all blank.
---------------------------------------------------------------------------- Andrew Rich VK4TEC [email protected] mailto:[email protected] http://www.tech-software.net
-----Original Message----- From: Dave Aitch [mailto:[email protected]] Sent: Sunday, 13 January 2008 3:45 AM To: w4upd; [email protected] Cc: Amsat-Bb@Amsat. Org Subject: Re: [amsat-bb] Re: wisp help
In addition to my last and what's been said by Reid, to save having the data base filled with information you don't need, edit the Kepler file before you ask WiSP to read it.
Dave.
When I go into the database, there are no satellites at all
---------------------------------------------------------------------------- Andrew Rich VK4TEC [email protected] mailto:[email protected] http://www.tech-software.net
-----Original Message----- From: w4upd [mailto:[email protected]] Sent: Sunday, 13 January 2008 2:46 AM To: [email protected] Cc: Amsat-Bb@Amsat. Org Subject: [SPAM] Re: [amsat-bb] wisp help Importance: Low
This sounds like the usual database being full problem. You will have to remove one or more of the unused satellites from your database and then the keps for ISS will get installed.
Reid, W4UPD
Andrew Rich wrote:
Hello
Wondering if someone can help
I am trying to get WISP to track the ISS.
I have updated the keps and wisp says "ISS - added to database"
But any attempt to get it to track says "ISS is not in the database"
Ideas ?
--
Andrew Rich VK4TEC [email protected] http://www.tech-software.net
Sent via [email protected]. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
I was running a USB hard disk.
The drive letter had changed from E to F
Wisp was lost - it still thought the wisp dir was E drive
Sorted - ta !!
---------------------------------------------------------------------------- Andrew Rich VK4TEC [email protected] mailto:[email protected] http://www.tech-software.net
-----Original Message----- From: [email protected] [mailto:[email protected]]On Behalf Of Andrew Rich Sent: Sunday, 13 January 2008 2:09 AM To: Amsat-Bb@Amsat. Org Subject: [SPAM] [amsat-bb] wisp help
Hello
Wondering if someone can help
I am trying to get WISP to track the ISS.
I have updated the keps and wisp says "ISS - added to database"
But any attempt to get it to track says "ISS is not in the database"
Ideas ?
---------------------------------------------------------------------------- Andrew Rich VK4TEC [email protected] http://www.tech-software.net
_______________________________________________ Sent via [email protected]. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
Great! Goes along with I said about it looking in a different location than you thought it was.
Reid, W4UPD
Andrew Rich wrote:
I was running a USB hard disk.
The drive letter had changed from E to F
Wisp was lost - it still thought the wisp dir was E drive
Sorted - ta !!
Andrew Rich VK4TEC [email protected] mailto:[email protected] http://www.tech-software.net
-----Original Message----- From: [email protected] [mailto:[email protected]]On Behalf Of Andrew Rich Sent: Sunday, 13 January 2008 2:09 AM To: Amsat-Bb@Amsat. Org Subject: [SPAM] [amsat-bb] wisp help
Hello
Wondering if someone can help
I am trying to get WISP to track the ISS.
I have updated the keps and wisp says "ISS - added to database"
But any attempt to get it to track says "ISS is not in the database"
Ideas ?
Andrew Rich VK4TEC [email protected] http://www.tech-software.net
Sent via [email protected]. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
Sent via [email protected]. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
Andrew,
At 10:36 AM 1/12/2008, you wrote:
I was running a USB hard disk.
The drive letter had changed from E to F
Wisp was lost - it still thought the wisp dir was E drive
Sorted - ta !!
I just dropped my pencil..
I bent over and there it was..
Ta da!
73, Dave, WB6LLO [email protected]
Disagree: I learn....
Pulling for P3E...
participants (4)
-
Andrew Rich -
Dave Aitch -
Dave Guimont -
w4upd