Hi Kevin,
I saw that error message once several version ago, but have never seen it again. A couple of questions.
Which virtual audio cable system are you using?
Version of OS, including "bitness?"
73s,
Alan WA4SCA
<-----Original Message----- <From: AMSAT-BB [mailto:[email protected]] On Behalf Of kevin schuchmann <Sent: Tuesday, January 31, 2017 1:02 PM <To: AMSAT BB [email protected] <Subject: [amsat-bb] foxtelem error < <Hi, < Does anyone else get a error message occasionally when stopping and <starting the decode on foxtelem? I have seen the following error on <multiple pc's < <javax.sound.sampled.LineUnavailableException:line with format PCM_SIGNED <48000.0Hz, 16 bit,stereo, 4 bytes/frame, little-endian not supported < <Makes it look like the audio line is unavailable, but doing nothing more <than closing the program and restarting it clears the error. < < <Thanks <Kevin wa6fwf <_______________________________________________ <Sent via [email protected] AMSAT-NA makes this open forum available <to all interested persons worldwide without requiring membership. Opinions expressed <are solely those of the author, and do not reflect the official views of AMSAT-NA. <Not an AMSAT-NA member? Join now to support the amateur satellite program! <Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
Hi Alan,
VBcable 1.0.3.2 64 bit, seen it on both win 7 64 and currently on win 8.1 64 , seen it on a intel I5 machine and currently on a I7 machine, SDR is a Airspy
73
kevin wa6fwf
On 1/31/2017 11:15 AM, Alan wrote:
Hi Kevin,
I saw that error message once several version ago, but have never seen it again. A couple of questions.
Which virtual audio cable system are you using?
Version of OS, including "bitness?"
73s,
Alan WA4SCA
<-----Original Message----- <From: AMSAT-BB [mailto:[email protected]] On Behalf Of kevin schuchmann <Sent: Tuesday, January 31, 2017 1:02 PM <To: AMSAT BB [email protected] <Subject: [amsat-bb] foxtelem error < <Hi, < Does anyone else get a error message occasionally when stopping and <starting the decode on foxtelem? I have seen the following error on <multiple pc's < <javax.sound.sampled.LineUnavailableException:line with format PCM_SIGNED <48000.0Hz, 16 bit,stereo, 4 bytes/frame, little-endian not supported < <Makes it look like the audio line is unavailable, but doing nothing more <than closing the program and restarting it clears the error. < < <Thanks <Kevin wa6fwf <_______________________________________________ <Sent via [email protected] AMSAT-NA makes this open forum available <to all interested persons worldwide without requiring membership. Opinions expressed <are solely those of the author, and do not reflect the official views of AMSAT-NA. <Not an AMSAT-NA member? Join now to support the amateur satellite program! <Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
Kevin,
The one time I saw it, I was testing VBcable on a 64 bit, Win10 machine for a few hours. I run pretty much 24/7 on a Win7 32-bit machine using Eugene Muzychenko's VAC with an Airspy.
73s,
Alan WA4SCA
<-----Original Message----- <From: kevin schuchmann [mailto:[email protected]] <Sent: Tuesday, January 31, 2017 1:23 PM <To: [email protected]; 'AMSAT BB' [email protected] <Subject: Re: [amsat-bb] FoxTelem error < <Hi Alan, < < VBcable 1.0.3.2 64 bit, seen it on both win 7 64 and currently on <win 8.1 64 , seen it on a intel I5 machine and currently on a I7 <machine, SDR is a Airspy < <73 < <kevin wa6fwf < < < <On 1/31/2017 11:15 AM, Alan wrote: <> Hi Kevin, <> <> I saw that error message once several version ago, but have never seen it again. A couple of <> questions. <> <> Which virtual audio cable system are you using? <> <> Version of OS, including "bitness?" <> <> 73s, <> <> Alan <> WA4SCA <> <> <> <> <> <-----Original Message----- <> <From: AMSAT-BB [mailto:[email protected]] On Behalf Of kevin schuchmann <> <Sent: Tuesday, January 31, 2017 1:02 PM <> <To: AMSAT BB [email protected] <> <Subject: [amsat-bb] foxtelem error <> < <> <Hi, <> < Does anyone else get a error message occasionally when stopping and <> <starting the decode on foxtelem? I have seen the following error on <> <multiple pc's <> < <> <javax.sound.sampled.LineUnavailableException:line with format PCM_SIGNED <> <48000.0Hz, 16 bit,stereo, 4 bytes/frame, little-endian not supported <> < <> <Makes it look like the audio line is unavailable, but doing nothing more <> <than closing the program and restarting it clears the error. <> < <> < <> <Thanks <> <Kevin wa6fwf <> <_______________________________________________ <> <Sent via [email protected] AMSAT-NA makes this open forum available <> <to all interested persons worldwide without requiring membership. Opinions expressed <> <are solely those of the author, and do not reflect the official views of AMSAT-NA. <> <Not an AMSAT-NA member? Join now to support the amateur satellite program! <> <Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb <> <>
Thanks Alan,
I'm kinda stuck with win 8.1 for IC-9100 audio driver support and stuck with 64 bit for some other things I'm doing.
I will give VAC a try and see if it works better, I also run 24/7 and what I see is after days or weeks of running I will see a good waveform but no decodes, stop-start get error restart program and off it goes again.
73
Kevin wa6fwf
On 1/31/2017 11:35 AM, Alan wrote:
Kevin,
The one time I saw it, I was testing VBcable on a 64 bit, Win10 machine for a few hours. I run pretty much 24/7 on a Win7 32-bit machine using Eugene Muzychenko's VAC with an Airspy.
73s,
Alan WA4SCA
<-----Original Message----- <From: kevin schuchmann [mailto:[email protected]] <Sent: Tuesday, January 31, 2017 1:23 PM <To: [email protected]; 'AMSAT BB' [email protected] <Subject: Re: [amsat-bb] FoxTelem error < <Hi Alan, < < VBcable 1.0.3.2 64 bit, seen it on both win 7 64 and currently on <win 8.1 64 , seen it on a intel I5 machine and currently on a I7 <machine, SDR is a Airspy < <73 < <kevin wa6fwf < < < <On 1/31/2017 11:15 AM, Alan wrote: <> Hi Kevin, <> <> I saw that error message once several version ago, but have never seen it again. A couple of <> questions. <> <> Which virtual audio cable system are you using? <> <> Version of OS, including "bitness?" <> <> 73s, <> <> Alan <> WA4SCA <> <> <> <> <> <-----Original Message----- <> <From: AMSAT-BB [mailto:[email protected]] On Behalf Of kevin schuchmann <> <Sent: Tuesday, January 31, 2017 1:02 PM <> <To: AMSAT BB [email protected] <> <Subject: [amsat-bb] foxtelem error <> < <> <Hi, <> < Does anyone else get a error message occasionally when stopping and <> <starting the decode on foxtelem? I have seen the following error on <> <multiple pc's <> < <> <javax.sound.sampled.LineUnavailableException:line with format PCM_SIGNED <> <48000.0Hz, 16 bit,stereo, 4 bytes/frame, little-endian not supported <> < <> <Makes it look like the audio line is unavailable, but doing nothing more <> <than closing the program and restarting it clears the error. <> < <> < <> <Thanks <> <Kevin wa6fwf <> <_______________________________________________ <> <Sent via [email protected] AMSAT-NA makes this open forum available <> <to all interested persons worldwide without requiring membership. Opinions expressed <> <are solely those of the author, and do not reflect the official views of AMSAT-NA. <> <Not an AMSAT-NA member? Join now to support the amateur satellite program! <> <Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb <> <>
Kevin,
As far as I can tell, that is an error in between the Java Virtual Machine and the OS. You could try getting the latest version of Java if you are not already on that. But it might not be fixable ....
73 Chris g0kla
On Tue, Jan 31, 2017 at 2:49 PM, kevin schuchmann [email protected] wrote:
Thanks Alan,
I'm kinda stuck with win 8.1 for IC-9100 audio driver support andstuck with 64 bit for some other things I'm doing.
I will give VAC a try and see if it works better, I also run 24/7 and what I see is after days or weeks of running I will see a good waveform but no decodes, stop-start get error restart program and off it goes again.
73
Kevin wa6fwf
On 1/31/2017 11:35 AM, Alan wrote:
Kevin,
The one time I saw it, I was testing VBcable on a 64 bit, Win10 machine for a few hours. I run pretty much 24/7 on a Win7 32-bit machine using Eugene Muzychenko's VAC with an Airspy.
73s,
Alan WA4SCA
<-----Original Message----- <From: kevin schuchmann [mailto:[email protected]] <Sent: Tuesday, January 31, 2017 1:23 PM <To: [email protected]; 'AMSAT BB' [email protected] <Subject: Re: [amsat-bb] FoxTelem error < <Hi Alan, < < VBcable 1.0.3.2 64 bit, seen it on both win 7 64 and currently on <win 8.1 64 , seen it on a intel I5 machine and currently on a I7 <machine, SDR is a Airspy < <73 < <kevin wa6fwf < < < <On 1/31/2017 11:15 AM, Alan wrote: <> Hi Kevin, <> <> I saw that error message once several version ago, but have never seen it again. A couple of <> questions. <> <> Which virtual audio cable system are you using? <> <> Version of OS, including "bitness?" <> <> 73s, <> <> Alan <> WA4SCA <> <> <> <> <> <-----Original Message----- <> <From: AMSAT-BB [mailto:[email protected]] On Behalf Of kevin schuchmann <> <Sent: Tuesday, January 31, 2017 1:02 PM <> <To: AMSAT BB [email protected] <> <Subject: [amsat-bb] foxtelem error <> < <> <Hi, <> < Does anyone else get a error message occasionally when stopping and <> <starting the decode on foxtelem? I have seen the following error on <> <multiple pc's <> < <> <javax.sound.sampled.LineUnavailableException:line with format PCM_SIGNED <> <48000.0Hz, 16 bit,stereo, 4 bytes/frame, little-endian not supported <> < <> <Makes it look like the audio line is unavailable, but doing nothing more <> <than closing the program and restarting it clears the error. <> < <> < <> <Thanks <> <Kevin wa6fwf <> <_______________________________________________ <> <Sent via [email protected] AMSAT-NA makes this open forum available <> <to all interested persons worldwide without requiring membership. Opinions expressed <> <are solely those of the author, and do not reflect the official views of AMSAT-NA. <> <Not an AMSAT-NA member? Join now to support the amateur satellite program! <> <Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb <> <>
Sent via [email protected] AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
Chris,
I have the latest Java, I also switched to VAC and ran for a couple days and saw the error, so I guess it is what it is as.
73
Kevin WA6FWF
On 2/2/2017 5:09 PM, Chris Thompson wrote:
Kevin,
As far as I can tell, that is an error in between the Java Virtual Machine and the OS. You could try getting the latest version of Java if you are not already on that. But it might not be fixable ....
73 Chris g0kla
On Tue, Jan 31, 2017 at 2:49 PM, kevin schuchmann <[email protected] mailto:[email protected]> wrote:
Thanks Alan, I'm kinda stuck with win 8.1 for IC-9100 audio driver support and stuck with 64 bit for some other things I'm doing. I will give VAC a try and see if it works better, I also run 24/7 and what I see is after days or weeks of running I will see a good waveform but no decodes, stop-start get error restart program and off it goes again. 73 Kevin wa6fwf On 1/31/2017 11:35 AM, Alan wrote: Kevin, The one time I saw it, I was testing VBcable on a 64 bit, Win10 machine for a few hours. I run pretty much 24/7 on a Win7 32-bit machine using Eugene Muzychenko's VAC with an Airspy. 73s, Alan WA4SCA <-----Original Message----- <From: kevin schuchmann [mailto:[email protected] <mailto:[email protected]>] <Sent: Tuesday, January 31, 2017 1:23 PM <To: [email protected] <mailto:[email protected]>; 'AMSAT BB' <[email protected] <mailto:[email protected]>> <Subject: Re: [amsat-bb] FoxTelem error < <Hi Alan, < < VBcable 1.0.3.2 64 bit, seen it on both win 7 64 and currently on <win 8.1 64 , seen it on a intel I5 machine and currently on a I7 <machine, SDR is a Airspy < <73 < <kevin wa6fwf < < < <On 1/31/2017 11:15 AM, Alan wrote: <> Hi Kevin, <> <> I saw that error message once several version ago, but have never seen it again. A couple of <> questions. <> <> Which virtual audio cable system are you using? <> <> Version of OS, including "bitness?" <> <> 73s, <> <> Alan <> WA4SCA <> <> <> <> <> <-----Original Message----- <> <From: AMSAT-BB [mailto:[email protected] <mailto:[email protected]>] On Behalf Of kevin schuchmann <> <Sent: Tuesday, January 31, 2017 1:02 PM <> <To: AMSAT BB <[email protected] <mailto:[email protected]>> <> <Subject: [amsat-bb] foxtelem error <> < <> <Hi, <> < Does anyone else get a error message occasionally when stopping and <> <starting the decode on foxtelem? I have seen the following error on <> <multiple pc's <> < <> <javax.sound.sampled.LineUnavailableException:line with format PCM_SIGNED <> <48000.0Hz, 16 bit,stereo, 4 bytes/frame, little-endian not supported <> < <> <Makes it look like the audio line is unavailable, but doing nothing more <> <than closing the program and restarting it clears the error. <> < <> < <> <Thanks <> <Kevin wa6fwf <> <_______________________________________________ <> <Sent via [email protected] <mailto:[email protected]>. AMSAT-NA makes this open forum available <> <to all interested persons worldwide without requiring membership. Opinions expressed <> <are solely those of the author, and do not reflect the official views of AMSAT-NA. <> <Not an AMSAT-NA member? Join now to support the amateur satellite program! <> <Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb <http://www.amsat.org/mailman/listinfo/amsat-bb> <> <> _______________________________________________ Sent via [email protected] <mailto:[email protected]>. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb <http://www.amsat.org/mailman/listinfo/amsat-bb>-- Chris E. Thompson [email protected] mailto:[email protected] [email protected] mailto:[email protected]
-
Alan -
Chris Thompson -
kevin schuchmann