Yes, the uplink frequency is 1267.603MHz. Up 1267.603MHz / Down 437.475MHz, GMSK 9k6 Unproto APRS via JQ1YTC
Up Down 1267.576 437.484 AOS 1267.603 437.475 TCA 1267.630 437.466 LOS
CO-65 continue doing ON of a transponder all the time for these periods in March 2009.
2/28(Sat)12:29 - 3/02(Mon) 0:38 3/06(Fri)12:57 - 3/09(Mon) 1:13 3/14(Sat) 1:23 - 3/16(Mon) 0:12 3/20(Fri)12:31 - 3/23(Mon) 0:46 3/27(Fri)11:30 - 3/30(Mon) 1:22 Coordinate Universal Time, UTC
When it is the elevation more than about 30 degrees, you will be able to digipeat your GMSK signals.
And you need to give power more than about 10 watts, and it's necessary to use a pre-amp for downlink because the output power from CO-65 is 300[mW]. This is VERY VERY weak output power from CO-65.
Today 00:20-00:32UTC, 1st Mar 2009, Mel 49deg, GMSK 9600bps JE9PEL>APRS,JQ1YTC* [03/01/09 00:27:13] <UI R>::SAT :Hello via CO-65 9k6 JA5BLZ>CQ,JQ1YTC* [03/01/09 00:27:51] <UI>::JE9PEL :HELLO VIA CO-65 JA5BLZ>CQ,JQ1YTC* [03/01/09 00:30:37] <UI>:73 ALL JH1BCL>CQ,JQ1YTC* [03/01/09 00:30:40] <UI>::JA5BLZ :RGR TNX MSG 73
JE9PEL, Mineo Wakita
I had several packets repeated (presumably) on the 0310 pass but I could not decode them. Signal was pretty strong on the downlink. Just using HyperTerminal and I'm sure I have a setting wrong.
Is there an easy program to use to digi that doesn't involve agwpe?
73, Drew KO4MA
----- Original Message ----- From: "Mineo Wakita" ei7m-wkt@asahi-net.or.jp To: amsat-bb@amsat.org Sent: Saturday, February 28, 2009 7:49 PM Subject: [amsat-bb] Re: CO-65 9k6 Digipeater hint... Award needed ?
Yes, the uplink frequency is 1267.603MHz. Up 1267.603MHz / Down 437.475MHz, GMSK 9k6 Unproto APRS via JQ1YTC
Up Down 1267.576 437.484 AOS 1267.603 437.475 TCA 1267.630 437.466 LOS
CO-65 continue doing ON of a transponder all the time for these periods in March 2009.
2/28(Sat)12:29 - 3/02(Mon) 0:38 3/06(Fri)12:57 - 3/09(Mon) 1:13 3/14(Sat) 1:23 - 3/16(Mon) 0:12 3/20(Fri)12:31 - 3/23(Mon) 0:46 3/27(Fri)11:30 - 3/30(Mon) 1:22 Coordinate Universal Time, UTC
When it is the elevation more than about 30 degrees, you will be able to digipeat your GMSK signals.
And you need to give power more than about 10 watts, and it's necessary to use a pre-amp for downlink because the output power from CO-65 is 300[mW]. This is VERY VERY weak output power from CO-65.
Today 00:20-00:32UTC, 1st Mar 2009, Mel 49deg, GMSK 9600bps JE9PEL>APRS,JQ1YTC* [03/01/09 00:27:13] <UI R>::SAT :Hello via CO-65 9k6 JA5BLZ>CQ,JQ1YTC* [03/01/09 00:27:51] <UI>::JE9PEL :HELLO VIA CO-65 JA5BLZ>CQ,JQ1YTC* [03/01/09 00:30:37] <UI>:73 ALL JH1BCL>CQ,JQ1YTC* [03/01/09 00:30:40] <UI>::JA5BLZ :RGR TNX MSG 73
JE9PEL, Mineo Wakita
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
participants (2)
-
Andrew Glasbrenner -
Mineo Wakita