Ignore the comment about reading 2.2 Ohms when not working. I just checked again and it reads about 4.4 ohms whether working or not. So I guess its getting stuck for some reason.

- Paul

I have a G-5500 that sometimes will not turn clock wise(CW) but will turn counter clockwise (CCW) OK. When it is working OK in both directions each winding (CW and CCW) measures about 4.4 Ohms in the shack. When it will not turn CW that winding measures about 2.2 ohms (The CCW winding still measures 4.4 ohms).

The Controller is fine, so the problem is in the motor.

Does this motor have brushes?

Any thoughts on what the problem might be?

Thanks

- Paul KW7Y