Hi Tim, you wrote:

I tune around the passband until I can hear a station clearly. When there's a break, I transmit my call. The other station will hear me, but by the time the reply comes, I can no longer hear them clearly.

When the other station answers and you don't hear his signal clearly don't tune the radio with the VFO but use the "Downl.-Corr." controls in menu "CAT" to correct your RX frequency until you hear the signal clearly again. That will leave your uplink frequency unchanged. You also may use the keys 2/8 and 3/9 of the numerical block of the keyboard to correct your downlink frequency in steps of +/- 10 or +/- 100 Hz. I added these controls to menu CAT particularly for the use with semi duplex radios (to fix the problem that you can't correct your uplink frequency because you can't hear your own signal).

The reason of your problem will be the following: When you first answer the other station you will probably not transmit on the exact uplink frequency - that means on the frequency on which the other station is listening (and on which - with a satellite radio - he will hear his own downlink signal). So, he will tune his radio until he hears your signal with the right audio. If he works with full Doppler correction changing the downlink will also change his uplink frequency. So, you will no longer hear his signal clearly.

The frequency values in Doppler.SQF that come with SatPC32 can't be exactly precise for all radios, due to - i.e.- hardware depending deviations between the radios up to a few KHz. Therefore these values should first be calibrated (typically only once) for the particular radio. That can easily be done if you can receive your own signal. With semi duplex radios it can be done with the help of another station. For detailed hints regarding this issue with semi duplex radios read the "Hints[CAT]" for "Yaesu users" sect. IV. 3. f and g. You can open the file from the SatPC32 menu "?".

73s, Erich, DK1TB

----- Original Message ----- From: "Tim Goodrich" tim@timgoodrich.net To: amsat-bb@amsat.org Sent: Wednesday, January 07, 2009 7:21 AM Subject: [amsat-bb] doppler tuning problem

Hi all,

Now that I finally have SatPC32 working with my 817, I'm having a new issue with Doppler tuning on the SSB birds. I tune around the passband until I can hear a station clearly. When there's a break, I transmit my call. The other station will hear me, but by the time the reply comes, I can no longer hear them clearly. It's almost as if the automatic Doppler tuning either can't keep up with or goes too fast to stay locked onto the correct frequency. I know its not the other station's frequency adjustment because this happens when there's a QSL already happening and they seem to be Doppler shifting at the same rate.

Any suggestions?

Thank you,

Tim

KC2DDS/AG

---

Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb