14 Feb
2007
14 Feb
'07
7:27 a.m.
Just as an FYI to ANDE users:
Although ANDE is much stronger in downlink signal compared to RAFT, you need to be aware that its spoken messages are transmitted at a lower output power.
So do not tune up the squelch too much when you work ANDE, as you will hear the APRS transmissions, but may miss the audio/voice transmissions.
Good luck !
Henk, PA3GUO
ps: ANDE VOICE needs to be enabled by a commandstation each pass, so it will not always be ON. Monitor the traffic.
6522
Age (days ago)
6522
Last active (days ago)
0 comments
1 participants
participants (1)
-
PA3GUO