I have been trying to use ARRISAT-1 for the past couple of days. Despite the fact it was almost directly overhead, I could not get my SSB signal through the transponder. I am using an IC-910 and arrow beam. I am fully aware of the antenna issue on the lady. Today I did not hear anything from the satellite. Has anyone been working through the satellite the past couple of day? Perhaps I have something wrong. The same rig and antenna works fine with the other satellites. With AO51, I run it at the minimum power which is probably about 5 watts.

I had several pleasant exchanges on AO-51 today. The thrill has not worn off for me and I doubt it ever will. Yep, I have worked several before but it is always nice to say hi to an old or new friend.

A big thank you to all involved who keep the old birds working. Most of us do not keep a rig as long as some of the still working birds have been flying. Too bad a service call cannot be made on the dormant ones.

73, -james W5AOO