Thanks Mark, Stefan, and John. I'm looking forward to using it.

Bob W7OTJ

On Tue, Feb 11, 2020 at 3:45 PM Mark L. Hammond marklhammond@gmail.com wrote:

Hi Bob,

As long as you shutdown SatPC32 before launching WSJT, it'll work fine! Using the USB cable only with WSJT, it can carry the audio (both xmit and recv) AND the CAT control to put the rig on frequency/mode, etc. It's quite slick :)

Mark N8MH

At 03:28 PM 2/11/2020 -0800, Bob Hammond via AMSAT-BB wrote:

I'm already using the 9700 USB connector for CAT control.

On Tue, Feb 11, 2020 at 11:45 AM Stefan Wagener wageners@gmail.com wrote:

...

Just use the USB cable. All you need. Lots of good videos out there

On Tue, Feb 11, 2020 at 1:10 PM Bob Hammond via AMSAT-BB < amsat-bb@amsat.org> wrote:

...

I hope this is an ok question for the AMSAT-BB.

I want to use WSJT-X with my IC-9700. What audio interface cable is suggested for use with a PC?

This is what I've found so far: XGGCOMMS Digimode-3-Icom

Bob W7OTJ _______________________________________________ Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite

program!

...

...

Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb

---

Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb