Eshail2 inverting yes or no?
While actually building equipment for Eshail2 (soldering iron was smoking ;-) I had a local QSO about Eshail2.
Suddenly someone asked if I knew if the transponder (up-/downlink) setup was inverted or non-inverted.
I remember having been told that the setup will be non-inverted, but can't find information/verification on this subject.
Personally I think it would be ideal if the transponder setup is non-inverting, so (let's say) 2.4G USB up --> 10.5G USB down.
Anyone who can clarify this?
It will be non-inverting...
https://www.facebook.com/pages/AMSAT-Deutschland/168177559891701
73s Peter DB2OS
Am 21. Mai 2016 17:09:48 GMT+08:00, schrieb Remco pa3fym@amsat.org:
While actually building equipment for Eshail2 (soldering iron was smoking ;-) I had a local QSO about Eshail2.
Suddenly someone asked if I knew if the transponder (up-/downlink) setup was inverted or non-inverted.
I remember having been told that the setup will be non-inverted, but can't find information/verification on this subject.
Personally I think it would be ideal if the transponder setup is non-inverting, so (let's say) 2.4G USB up --> 10.5G USB down.
Anyone who can clarify this? _______________________________________________ Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
participants (2)
-
Peter Gülzow -
Remco