Hi David

I use HamRadioDeluxe. It non-stop tunes my TS2000 (at least) in 10Hz steps, maybe even smaller, but I cannot see that on the display.

Henk

Hi Henk,

Thanks for the recording,. Are you using an automatic Doppler shift compensation? At what resolution? I cant hear the tuning steps.

73, David 4X6IA

----- Original Message ----- From: "Henk, PA3GUO" To: amsat-bb@amsat.org Sent: Wednesday, December 23, 2009 7:42 PM Subject: [amsat-bb] XW-1 CW Beacon very stable

...

Hi Alan,

XW-1 is extra-ordinary stable with its CW Beacon.

Using the current kepler set, I can set the filter of my Kenwood TS2000 to 50Hz, and XW-1 stays nicely within during the entire pass (15..20 minutes). Well done !

This is just 55 seconds: http://www.pa3guo.com/ho68_cw_beacon_21dec09_1008utc_pa3guo.mp3

Best regards Henk, PA3GUO The Netherlands (Europe) http://www.pa3guo.com

---

Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

Happy new year with HO-68

----- Original Message ----- From: Danny Casier To: amsat-bb@amsat.org Sent: Wednesday, December 23, 2009 9:17 PM Subject: [amsat-bb] HO68 is GREAT

Hallo satboys,

HO68 (XW-1) linear transponder is great. I worked ST2NH, ON, I, F, OE, SP, and G The max elivation was 67° and i had to reduce the power from 30°. I heard distortion on full power. I could work the sat from 1° elevation with the 8 el horizontal polarisation.

This is a great job from the Chinees hams. Congrats.

Merry Chrismas. Dan ON5UE

_______________________________________________ Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb