" amsat-bb@amsat.org Content-Transfer-Encoding: quoted-printable Mime-Version: 1.0 (1.0)
I know I'm missing something simple but I just cant find it. I have pcsat32 r= unning under windows 7 to controll my kenwood ts-2000. If i click on a satel= lite, the rig goes to the appropriate mode and frequency. The program then s= tarts the doppler adjustment but the frequency on the rig never changes. If I= turn the tuning knob on the rig, the new frequency doesnt transfer to the p= rogram. I have another control program which works fine, so the hardware is i= ntact, so its something i have done wrong in the set up. I have checked baud= rate, com ports and such and all are correct. Thank you for all your help. 7= 3, keith kg2ix=
Keith,
I changed the subject to the actual name of the program. It will help people find it who can help.
Which satellites have you tried? What is the program that works? 32 or 64 bit WIN7?
Are you using a USB serial port? Which chip set? Have you tried increasing the CAT delay parameter? SatPC32 hits the comms hard to provide precise control, and some USB ports, especially with 64 bit drivers, can fail.
73s,
Alan WA4SCA
<-----Original Message----- <From: amsat-bb-bounces@amsat.org <[mailto:amsat-bb-bounces@amsat.org] On Behalf Of Keith McDonnell <Sent: Thursday, May 01, 2014 7:48 PM <To: "amsat-bb@amsat.org"@optonline.net <Subject: [amsat-bb] Pcsat32 doppler problem < <" amsat-bb@amsat.org <Content-Transfer-Encoding: quoted-printable <Mime-Version: 1.0 (1.0) < <I know I'm missing something simple but I just cant find it. I <have pcsat32 r= <unning under windows 7 to controll my kenwood ts-2000. If i <click on a satel= <lite, the rig goes to the appropriate mode and frequency. The <program then s= <tarts the doppler adjustment but the frequency on the rig <never changes. If I= < turn the tuning knob on the rig, the new frequency doesnt <transfer to the p= <rogram. I have another control program which works fine, so <the hardware is i= <ntact, so its something i have done wrong in the set up. I <have checked baud= < rate, com ports and such and all are correct. Thank you for <all your help. 7= <3, keith kg2ix= <_______________________________________________ <Sent via AMSAT-BB@amsat.org. Opinions expressed are those of <the author. <Not an AMSAT-NA member? Join now to support the amateur <satellite program! <Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb <
I know this is super-basic, but did you click on the "C-" (turning it to "C+") in the upper left portion of the program window to enable computer control of the radio?
George, KA3HSW
<-----Original Message----- <From: amsat-bb-bounces@amsat.org <[mailto:amsat-bb-bounces@amsat.org] On Behalf Of Keith McDonnell <Sent: Thursday, May 01, 2014 7:48 PM <To: "amsat-bb@amsat.org"@optonline.net <Subject: [amsat-bb] Pcsat32 doppler problem < <" amsat-bb@amsat.org <Content-Transfer-Encoding: quoted-printable <Mime-Version: 1.0 (1.0) < <I know I'm missing something simple but I just cant find it. I <have pcsat32 r= <unning under windows 7 to controll my kenwood ts-2000. If i <click on a satel= <lite, the rig goes to the appropriate mode and frequency. The <program then s= <tarts the doppler adjustment but the frequency on the rig <never changes. If I= < turn the tuning knob on the rig, the new frequency doesnt <transfer to the p= <rogram. I have another control program which works fine, so <the hardware is i= <ntact, so its something i have done wrong in the set up. I <have checked baud= < rate, com ports and such and all are correct. Thank you for <all your help. 7= <3, keith kg2ix=
participants (3)
-
Alan -
George Henry -
Keith McDonnell