I had been using an old version 'd' for quite a while with my IC9700. On trying to update to the latest 'd' version, I keep getting an error message: "Error while loading file YaesuIIPar.SQF, program will close"
I am using Win7 64bit Pro.
Any help would be appreciated.
(Of course, SDX still loads and then has to be taken down with Task Manager.)
Dan
Sent from ARS: NM3A
Hi Dan,
A few things to consider. First, it is recommended to fully *uninstall* SatPC32 before updating. To keep customized settings, use the backup utility in the software to save your local settings before uninstalling. SDX normally closes when SatPC32 is terminated in the official way (File - Quit). That also helps saving local window settings etc. The YaesuPar.SQF file contains information for Yaesu radios... I assume you are using a Yaesu radio (?). If the file is corrupted by your installation, I would suggest a complete uninstall and re-install of SatPC32. See if that helps.
73, Stefan VE4SW
On Fri, Jan 31, 2020 at 8:01 AM Daniel Walter via AMSAT-BB < amsat-bb@amsat.org> wrote:
I had been using an old version 'd' for quite a while with my IC9700. On trying to update to the latest 'd' version, I keep getting an error message: "Error while loading file YaesuIIPar.SQF, program will close"
I am using Win7 64bit Pro.
Any help would be appreciated.
(Of course, SDX still loads and then has to be taken down with Task Manager.)
Dan
Sent from ARS: NM3A _______________________________________________ Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
Also, remember to backup your data with the built in routine. I usually leave the backup/restore program from SATPC32 open. Do the backup, then uninstall SATPC32. Install the new one, then use the restore feature. Ready to go.
73...bruce
On 1/31/2020 8:25 AM, Stefan Wagener via AMSAT-BB wrote:
Hi Dan,
A few things to consider. First, it is recommended to fully *uninstall* SatPC32 before updating. To keep customized settings, use the backup utility in the software to save your local settings before uninstalling. SDX normally closes when SatPC32 is terminated in the official way (File - Quit). That also helps saving local window settings etc. The YaesuPar.SQF file contains information for Yaesu radios... I assume you are using a Yaesu radio (?). If the file is corrupted by your installation, I would suggest a complete uninstall and re-install of SatPC32. See if that helps.
73, Stefan VE4SW
On Fri, Jan 31, 2020 at 8:01 AM Daniel Walter via AMSAT-BB < amsat-bb@amsat.org> wrote:
I had been using an old version 'd' for quite a while with my IC9700. On trying to update to the latest 'd' version, I keep getting an error message: "Error while loading file YaesuIIPar.SQF, program will close"
I am using Win7 64bit Pro.
Any help would be appreciated.
(Of course, SDX still loads and then has to be taken down with Task Manager.)
Dan
Sent from ARS: NM3A _______________________________________________ Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
Dan,
Be certain to try the new installation before restoring your data. It is possible there is corruption in your user data.
73,
Alan WA4SCA
<-----Original Message----- <From: AMSAT-BB [mailto:amsat-bb-bounces@amsat.org] On Behalf Of Bruce <via AMSAT-BB <Sent: Friday, January 31, 2020 9:19 AM <To: amsat-bb@amsat.org <Subject: Re: [amsat-bb] SatPC32 install issue < <Also, remember to backup your data with the built in routine. I usually <leave the backup/restore program from SATPC32 open. Do the backup, then <uninstall SATPC32. Install the new one, then use the restore feature. <Ready to go. < <73...bruce < <On 1/31/2020 8:25 AM, Stefan Wagener via AMSAT-BB wrote: <> Hi Dan, <> <> A few things to consider. First, it is recommended to fully *uninstall* <SatPC32 <> before updating. To keep customized settings, use the backup utility in the <> software to save your local settings before uninstalling. SDX normally <> closes when SatPC32 is terminated in the official way (File - Quit). That <> also helps saving local window settings etc. The YaesuPar.SQF file contains <> information for Yaesu radios... I assume you are using a Yaesu radio (?). <> If the file is corrupted by your installation, I would suggest a complete <> uninstall and re-install of SatPC32. See if that helps. <> <> 73, Stefan VE4SW <> <> On Fri, Jan 31, 2020 at 8:01 AM Daniel Walter via AMSAT-BB < <> amsat-bb@amsat.org> wrote: <> <>> I had been using an old version 'd' for quite a while with my IC9700. On <>> trying to update to the latest 'd' version, I keep getting an error <>> message: "Error while loading file YaesuIIPar.SQF, program will close" <>> <>> I am using Win7 64bit Pro. <>> <>> Any help would be appreciated. <>> <>> (Of course, SDX still loads and then has to be taken down with Task <>> Manager.) <>> <>> <>> Dan <>> <>> <>> Sent from ARS: NM3A <>> _______________________________________________ <>> Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum <available <>> to all interested persons worldwide without requiring membership. <Opinions <>> expressed <>> are solely those of the author, and do not reflect the official views of <>> AMSAT-NA. <>> Not an AMSAT-NA member? Join now to support the amateur satellite <program! <>> Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb <>> <> _______________________________________________ <> Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum <available <> to all interested persons worldwide without requiring membership. <Opinions expressed <> are solely those of the author, and do not reflect the official views of <AMSAT-NA. <> Not an AMSAT-NA member? Join now to support the amateur satellite <program! <> Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb < < <-- < <Bruce Paige, KK5DO < <AMSAT Director Contests and Awards <AMSAT Board Member 2016-2020 < <ARRL Awards Field Checker (WAS, 5BWAS, VUCC), VE < <Houston AMSAT Net - Wed 0100z on Echolink - Conference *AMSAT* <Also live streaming MP3 at http://www.amsatnet.com <Podcast at http://www.amsatnet.com/podcast.xml or iTunes < <Latest satellite news on the ARRL Audio News <http://www.arrl.org < <AMSAT on Twitter http://www.twitter.com/amsat < <_______________________________________________ <Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available <to all interested persons worldwide without requiring membership. Opinions <expressed <are solely those of the author, and do not reflect the official views of AMSAT- <NA. <Not an AMSAT-NA member? Join now to support the amateur satellite <program! <Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
participants (4)
-
Alan -
Bruce -
Daniel Walter -
Stefan Wagener