Re: LVB Tracker Indicates 255° out from G-5500 control
Thank you very much, Mike. No, I hadn't calibrated the LVB Tracker to the G-5500 control box. I looked around the web for the LVB documentation but had no success. I was really surprised to not find any documentation or even mention of the LVB Tracker on the AMSAT web page. Regardless, thank you for your help. I think this will enable me to get the array going.
Thanks, Robin Midgett K4IDC
On Sun, Oct 8, 2023 at 10:30 PM Mike wb8cxo@gmail.com wrote:
Robin, did you calibrate your LVBTracker to your G-5500 control box?
Attached a document that might help. There's two ways to do the calibration. Use the front panel pushbuttons or text commands sent to the tracker via it's serial interface.
Mike, WB8CXO On 10/8/2023 9:54 PM, K4IDC via AMSAT-BB wrote:
This evening I connected my new to me LVB tracker to the G-5500 control box (also new to me) for the first time..all seems well except that the azimuth reading between the G-5500 control & the LVB tracker are 255° apart. I know the array is pointed west, the G-5500 box indicates west, but for a reason I'm not aware of presently the LVB Tracker shows +15°. Any thoughts?
Thanks, Robin Midgett K4IDC
Sent via AMSAT-BB(a)amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Acceptable Use and Privacy Policies available at https://www.amsat.org/about-amsat/
View archives of this mailing list athttps://mailman.amsat.org/hyperkitty/list/amsat-bb@amsat.org To unsubscribe send an email to amsat-bb-leave(a)amsat.org Manage all of your AMSAT-NA mailing list preferences at https://mailman.amsat.org
participants (1)
-
K4IDC