Looking at setting up a remote base satellite station to escape local increasing RFI, foliage, adverse terrain etc... I've been studying successful implementations using TS2000, FlexRadios, etc.and software SatPC32, FLRig, DXCommander, VNC, NX, etc... and may end up going one of those ways. Also looking at IC-9700.
If you've successfully used an IC-9700 remotely, please email me direct. What software are you using, remote access method, additional accessories or items you found particularly handy.
Thanks in advance! 73 de KS1G
Stephan
I can tell you about Flex if you like. I use a 6600M with 2 transverters remote with SatPC32. It is nice to have a much more detailed waterfall than the IC-9700 (down to about 5hz/pixel).
I could do it with the IC-9700 I have, but the configuration is a bit more complicated and I will actually be parting with the IC-9700 sometime soon since I don't do any 1.2Ghz.
Mike va3mw
On Sun, Aug 23, 2020 at 11:03 AM Stephan Greene via AMSAT-BB < amsat-bb@amsat.org> wrote:
Looking at setting up a remote base satellite station to escape local increasing RFI, foliage, adverse terrain etc... I've been studying successful implementations using TS2000, FlexRadios, etc.and software SatPC32, FLRig, DXCommander, VNC, NX, etc... and may end up going one of those ways. Also looking at IC-9700.
If you've successfully used an IC-9700 remotely, please email me direct. What software are you using, remote access method, additional accessories or items you found particularly handy.
Thanks in advance! 73 de KS1G _______________________________________________ Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
participants (2)
-
Michael Walker -
Stephan Greene