The GO32 header/beacon now shows uplink frequencies for the new modes. Thanks to ground control for this update and reminder for those of use using multiple modes on.

WinPack Users: See the SCRIPT folder under \WINPACK or wherever you installed the program for a script TM-D700.TXT For GO-32, this file requires some editing; specifically "SEND UNPROTO change this from the variable $BBS to APRS VIA 4XTECH etc ", "SEND HB 9600", "SEND MYCALL change it from the variable $MYCALL to your hardcoded call" , and at the end you could optionally add "SEND CONV"

You can also add 2 lines to the top of the script "HOTKEY F?" where ? is an unused F-Key in your WinPack scripts and a second line similar to "TITLE GO-32 APRS" so that you can initialize your TNC with a single F-Key.

Perhaps someone using the D7 could post their working script for WinPack.

... from an olde packet user from the '80's who as found a new use for the olde MFJ1270C with the 9600 daughter board. Just dusted it off and it works great with the FT-847 and WISP32 too. See y'all on GO-32

... Enjoy and 73, Alan VE4YZ AMSAT 35968 http://www.mts.net/~ve4wsc/ AMSAT A-485