IC-705 for Satellites
I saw a PowerPoint presentation on this new Icom radio suggesting it could be used for satellite operation, but it's my understanding that it is not full duplex so how are they using it on satellites without experiencing great difficulty finding their own downlink? I also am not sure if SatPC32 is compatible with this radio. Does anyone have any experience using the 705 for satellite operation?
73 Rick, W2JAZ
dual FT-817's (or 818's): Old and busted. dual IC-705's: New hotness.
--Roy K3RLD
I assume they are doing the same thing everyone using two radios is doing. I know at least one person using two 705's on the birds.
It certainly would be lighter than using my IC-7100.
On Tue, Feb 16, 2021, 17:59 Richard Lawn [email protected] wrote:
I saw a PowerPoint presentation on this new Icom radio suggesting it could be used for satellite operation, but it's my understanding that it is not full duplex so how are they using it on satellites without experiencing great difficulty finding their own downlink? I also am not sure if SatPC32 is compatible with this radio. Does anyone have any experience using the 705 for satellite operation?
73 Rick, W2JAZ
Sent via AMSAT-BB(a)amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program!
View archives of this mailing list at https://mailman.amsat.org/hyperkitty/list/[email protected] To unsubscribe send an email to amsat-bb-leave(a)amsat.org Manage all of your AMSAT-NA mailing list preferences at https://mailman.amsat.org
Somewhere in my dreams, Icom upgrades the IC-705 to include full duplex and a satellite mode in a future version. I'd sell all my other ham radio stuff and just go with the 705 on that day. Unfortunately, it's NOT full duplex so I think some use it paired with something else for the uplink or downlink. I think there are a few out there that bought dual 705's for satellite work. I'm not lucky enough for that though...
73 de KI4SIY 🛰️ (James in FM02)
On Tue, Feb 16, 2021, 17:59 Richard Lawn [email protected] wrote:
I saw a PowerPoint presentation on this new Icom radio suggesting it could be used for satellite operation, but it's my understanding that it is not full duplex so how are they using it on satellites without experiencing great difficulty finding their own downlink? I also am not sure if SatPC32 is compatible with this radio. Does anyone have any experience using the 705 for satellite operation?
73 Rick, W2JAZ
Sent via AMSAT-BB(a)amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program!
View archives of this mailing list at https://mailman.amsat.org/hyperkitty/list/[email protected] To unsubscribe send an email to amsat-bb-leave(a)amsat.org Manage all of your AMSAT-NA mailing list preferences at https://mailman.amsat.org
Although not recommended, there is no real reason to find your downlink other than avoiding other stations. Back when folks had separate transmitters and receivers it was even common practice on HF to call on your (crystal) frequency and tune around the band for someone answering your call. The same applies to satellites.
Again not recommended but very doable….
73, Joe kk0sd
From: Richard Lawn [email protected] Sent: Tuesday, February 16, 2021 4:58 PM To: Amsat BB [email protected] Subject: [AMSAT-BB] IC-705 for Satellites
I saw a PowerPoint presentation on this new Icom radio suggesting it could be used for satellite operation, but it's my understanding that it is not full duplex so how are they using it on satellites without experiencing great difficulty finding their own downlink? I also am not sure if SatPC32 is compatible with this radio. Does anyone have any experience using the 705 for satellite operation?
73 Rick, W2JAZ
Please. Highly NOT recommend.
Bob M. N6RFM
On Feb 16, 2021, at 18:35, Gary [email protected] wrote:
Although not recommended, there is no real reason to find your downlink other than avoiding other stations. Back when folks had separate transmitters and receivers it was even common practice on HF to call on your (crystal) frequency and tune around the band for someone answering your call. The same applies to satellites.
Again not recommended but very doable….
73, Joe kk0sd
From: Richard Lawn [email protected] Sent: Tuesday, February 16, 2021 4:58 PM To: Amsat BB [email protected] Subject: [AMSAT-BB] IC-705 for Satellites
I saw a PowerPoint presentation on this new Icom radio suggesting it could be used for satellite operation, but it's my understanding that it is not full duplex so how are they using it on satellites without experiencing great difficulty finding their own downlink? I also am not sure if SatPC32 is compatible with this radio. Does anyone have any experience using the 705 for satellite operation?
73 Rick, W2JAZ
Sent via AMSAT-BB(a)amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program!
View archives of this mailing list at https://mailman.amsat.org/hyperkitty/list/[email protected] To unsubscribe send an email to amsat-bb-leave(a)amsat.org Manage all of your AMSAT-NA mailing list preferences at https://mailman.amsat.org
participants (6)
-
Don KB2YSI -
Gary -
Richard Lawn -
Robert Mattaliano -
Roy Dean -
Ryland Bayne