New SatPC Version with 9700
I have to admit that I'm having trouble following Erich's instructions for activating the new spectrum scope for ic-9700 radios he has added. I got to #5 where he says "Open the SatPC32 menu DIV and click on Spectrum. On my copy there is no such menu item.
I'd appreciate someone sharing their radio and software setup as I'm not having any luck.
Happy New Year! Rick, W2JAZ
Its in the menu "ACCY", last item in the list.
Happy New Year,
Stefan
On Tue, Dec 31, 2019 at 9:59 PM Richard Lawn via AMSAT-BB < [email protected]> wrote:
I have to admit that I'm having trouble following Erich's instructions for activating the new spectrum scope for ic-9700 radios he has added. I got to #5 where he says "Open the SatPC32 menu DIV and click on Spectrum. On my copy there is no such menu item.
I'd appreciate someone sharing their radio and software setup as I'm not having any luck.
Happy New Year! Rick, W2JAZ _______________________________________________ Sent via [email protected]. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
Where are IC-9700 operators getting the data cable needed to use the spectrum function of SatPC32? I see the ICOM OPC-2350LU for ~$70. I don't see any cable for $25. I thought I did but this one has a 3.5mm plug, not the 2.5mm plug to match the IC-9700: Valley Enterprises Icom CT-17 USB FTDI Chipset CI-V Cat Control Programming Cable, Length 3 Feet Bob
On Tue, Dec 31, 2019 at 8:25 PM Stefan Wagener via AMSAT-BB < [email protected]> wrote:
Its in the menu "ACCY", last item in the list.
Happy New Year,
Stefan
On Tue, Dec 31, 2019 at 9:59 PM Richard Lawn via AMSAT-BB < [email protected]> wrote:
I have to admit that I'm having trouble following Erich's instructions
for
activating the new spectrum scope for ic-9700 radios he has added. I got
to
#5 where he says "Open the SatPC32 menu DIV and click on Spectrum. On my copy there is no such menu item.
I'd appreciate someone sharing their radio and software setup as I'm not having any luck.
Happy New Year! Rick, W2JAZ _______________________________________________ Sent via [email protected]. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership.
Opinions
expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite
program!
Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
Sent via [email protected]. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
Bob,
https://www.amazon.com/dp/B004L0T4UM/ref=cm_sw_r_cp_awdb_t1_548dEbWZ7ET5D
Dave-KB1PVH
Sent from my Galaxy S9
On Fri, Jan 3, 2020, 6:20 PM Bob Hammond via AMSAT-BB [email protected] wrote:
Where are IC-9700 operators getting the data cable needed to use the spectrum function of SatPC32? I see the ICOM OPC-2350LU for ~$70. I don't see any cable for $25. I thought I did but this one has a 3.5mm plug, not the 2.5mm plug to match the IC-9700: Valley Enterprises Icom CT-17 USB FTDI Chipset CI-V Cat Control Programming Cable, Length 3 Feet Bob
On Tue, Dec 31, 2019 at 8:25 PM Stefan Wagener via AMSAT-BB < [email protected]> wrote:
Its in the menu "ACCY", last item in the list.
Happy New Year,
Stefan
On Tue, Dec 31, 2019 at 9:59 PM Richard Lawn via AMSAT-BB < [email protected]> wrote:
I have to admit that I'm having trouble following Erich's instructions
for
activating the new spectrum scope for ic-9700 radios he has added. I
got
to
#5 where he says "Open the SatPC32 menu DIV and click on Spectrum. On
my
copy there is no such menu item.
I'd appreciate someone sharing their radio and software setup as I'm
not
having any luck.
Happy New Year! Rick, W2JAZ _______________________________________________ Sent via [email protected]. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership.
Opinions
expressed are solely those of the author, and do not reflect the official views
of
AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite
program!
Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
Sent via [email protected]. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership.
Opinions
expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite
program!
Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
Sent via [email protected]. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
How about 18.97? I left my homebrew CI-V cable in NJ in my move down for the winter so I bought one of these,
https://www.amazon.com/gp/product/B076Z8RRJ6/ref=ppx_yo_dt_b_asin_title_o05_ s00?ie=UTF8&psc=1
works 100%, or you could just try a 3 to 2 1/8 adapter........
73 Jeff kb2m
original Message-----
rom: AMSAT-BB [email protected] On Behalf Of Bob Hammond via AMSAT-BB
ent: Friday, January 03, 2020 18:16
ubject: Re: [amsat-bb] New SatPC Version with 9700
here are IC-9700 operators getting the data cable needed to use the spectrum function of SatPC32?
see the ICOM OPC-2350LU for ~$70. I don't see any cable for $25. I thought I did but this one has a 3.5mm plug,
t the 2.5mm plug to match the IC-9700: Valley Enterprises Icom CT-17 USB FTDI Chipset CI-V Cat Control
ogramming Cable, Length 3 Feet Bob
n Tue, Dec 31, 2019 at 8:25 PM Stefan Wagener via AMSAT-BB < [email protected]> wrote:
Its in the menu "ACCY", last item in the list.
Happy New Year,
Stefan
On Tue, Dec 31, 2019 at 9:59 PM Richard Lawn via AMSAT-BB <
[email protected]> wrote:
I have to admit that I'm having trouble following Erich's
instructions
for
activating the new spectrum scope for ic-9700 radios he has added. I
got
to
#5 where he says "Open the SatPC32 menu DIV and click on Spectrum.
On my copy there is no such menu item.
I'd appreciate someone sharing their radio and software setup as I'm
not having any luck.
Happy New Year!
Rick, W2JAZ
Sent via [email protected]. AMSAT-NA makes this open forum
available to all interested persons worldwide without requiring
membership.
Opinions
expressed
are solely those of the author, and do not reflect the official
views of AMSAT-NA.
Not an AMSAT-NA member? Join now to support the amateur satellite
program!
Subscription settings:
_______________________________________________
Sent via [email protected]. AMSAT-NA makes this open forum available
to all interested persons worldwide without requiring membership.
Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
_______________________________________________ Sent via [email protected]. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
Bob, the 9700 uses the 3.5 mm size plug for CAT control, same as the 910 or 9100. The smaller jack 2.5 mm is for something else (GPS DATA).
Mark N8MH.
On Fri, Jan 3, 2020 at 6:18 PM Bob Hammond via AMSAT-BB [email protected] wrote:
Where are IC-9700 operators getting the data cable needed to use the spectrum function of SatPC32? I see the ICOM OPC-2350LU for ~$70. I don't see any cable for $25. I thought I did but this one has a 3.5mm plug, not the 2.5mm plug to match the IC-9700: Valley Enterprises Icom CT-17 USB FTDI Chipset CI-V Cat Control Programming Cable, Length 3 Feet Bob
On Tue, Dec 31, 2019 at 8:25 PM Stefan Wagener via AMSAT-BB < [email protected]> wrote:
Its in the menu "ACCY", last item in the list.
Happy New Year,
Stefan
On Tue, Dec 31, 2019 at 9:59 PM Richard Lawn via AMSAT-BB < [email protected]> wrote:
I have to admit that I'm having trouble following Erich's instructions
for
activating the new spectrum scope for ic-9700 radios he has added. I
got
to
#5 where he says "Open the SatPC32 menu DIV and click on Spectrum. On
my
copy there is no such menu item.
I'd appreciate someone sharing their radio and software setup as I'm
not
having any luck.
Happy New Year! Rick, W2JAZ _______________________________________________ Sent via [email protected]. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership.
Opinions
expressed are solely those of the author, and do not reflect the official views
of
AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite
program!
Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
Sent via [email protected]. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership.
Opinions
expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite
program!
Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
Sent via [email protected]. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
Mark, thanks for clarifying which jack is which. I saw (and read in the manual) DATA and thought it meant the CAT data.
Bob W7OTJ
On Fri, Jan 3, 2020 at 4:54 PM Mark L. Hammond [email protected] wrote:
Bob, the 9700 uses the 3.5 mm size plug for CAT control, same as the 910 or 9100. The smaller jack 2.5 mm is for something else (GPS DATA).
Mark N8MH.
On Fri, Jan 3, 2020 at 6:18 PM Bob Hammond via AMSAT-BB < [email protected]> wrote:
Where are IC-9700 operators getting the data cable needed to use the spectrum function of SatPC32? I see the ICOM OPC-2350LU for ~$70. I don't see any cable for $25. I thought I did but this one has a 3.5mm plug, not the 2.5mm plug to match the IC-9700: Valley Enterprises Icom CT-17 USB FTDI Chipset CI-V Cat Control Programming Cable, Length 3 Feet Bob
On Tue, Dec 31, 2019 at 8:25 PM Stefan Wagener via AMSAT-BB < [email protected]> wrote:
Its in the menu "ACCY", last item in the list.
Happy New Year,
Stefan
On Tue, Dec 31, 2019 at 9:59 PM Richard Lawn via AMSAT-BB < [email protected]> wrote:
I have to admit that I'm having trouble following Erich's instructions
for
activating the new spectrum scope for ic-9700 radios he has added. I
got
to
#5 where he says "Open the SatPC32 menu DIV and click on Spectrum. On
my
copy there is no such menu item.
I'd appreciate someone sharing their radio and software setup as I'm
not
having any luck.
Happy New Year! Rick, W2JAZ _______________________________________________ Sent via [email protected]. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership.
Opinions
expressed are solely those of the author, and do not reflect the official views
of
AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite
program!
Subscription settings:
https://www.amsat.org/mailman/listinfo/amsat-bb
Sent via [email protected]. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership.
Opinions
expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite
program!
Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
Sent via [email protected]. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
-- Mark L. Hammond [N8MH]
Thanks for posting this question. I needed help too. I just purchased a CT-17 from amazon for $27 this evening. Thanks, Mike AF5AT
On Fri, Jan 3, 2020 at 9:29 PM Bob Hammond via AMSAT-BB [email protected] wrote:
Mark, thanks for clarifying which jack is which. I saw (and read in the manual) DATA and thought it meant the CAT data.
Bob W7OTJ
On Fri, Jan 3, 2020 at 4:54 PM Mark L. Hammond [email protected] wrote:
Bob, the 9700 uses the 3.5 mm size plug for CAT control, same as the 910 or 9100. The smaller jack 2.5 mm is for something else (GPS DATA).
Mark N8MH.
On Fri, Jan 3, 2020 at 6:18 PM Bob Hammond via AMSAT-BB < [email protected]> wrote:
Where are IC-9700 operators getting the data cable needed to use the spectrum function of SatPC32? I see the ICOM OPC-2350LU for ~$70. I don't see any cable for $25. I thought I did but this one has a 3.5mm plug, not the 2.5mm plug to match the IC-9700: Valley Enterprises Icom CT-17 USB FTDI Chipset CI-V Cat Control Programming Cable, Length 3 Feet Bob
On Tue, Dec 31, 2019 at 8:25 PM Stefan Wagener via AMSAT-BB < [email protected]> wrote:
Its in the menu "ACCY", last item in the list.
Happy New Year,
Stefan
On Tue, Dec 31, 2019 at 9:59 PM Richard Lawn via AMSAT-BB < [email protected]> wrote:
I have to admit that I'm having trouble following Erich's
instructions
for
activating the new spectrum scope for ic-9700 radios he has added. I
got
to
#5 where he says "Open the SatPC32 menu DIV and click on Spectrum.
On
my
copy there is no such menu item.
I'd appreciate someone sharing their radio and software setup as I'm
not
having any luck.
Happy New Year! Rick, W2JAZ _______________________________________________ Sent via [email protected]. AMSAT-NA makes this open forum
available
to all interested persons worldwide without requiring membership.
Opinions
expressed are solely those of the author, and do not reflect the official
views
of
AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite
program!
Subscription settings:
https://www.amsat.org/mailman/listinfo/amsat-bb
Sent via [email protected]. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership.
Opinions
expressed are solely those of the author, and do not reflect the official views
of
AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite
program!
Subscription settings:
https://www.amsat.org/mailman/listinfo/amsat-bb
Sent via [email protected]. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite
program!
Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
-- Mark L. Hammond [N8MH]
Sent via [email protected]. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
participants (7)
-
Bob Hammond -
Dave Webb KB1PVH -
Jeff -
Mark L. Hammond -
Mike Wilhelm -
Richard Lawn -
Stefan Wagener