Thanks Dave

I could not get the syntax right

It wanted

name@url

Andrew VK4TEC

On 25 Oct 2017, at 9:24 pm, Dave Webb KB1PVH kb1pvh@gmail.com wrote:

1. Open Orbitron

2. Click the Setup icon (crossed wrench and hammer)

3. Click the TLE Updater tab.

4. Click the Edit group icon next to the Group name (looks like paper with

lines)

5. In Group editor add http://www.amsat.org/tle/current/nasabare.txt and

click OK

6. Click the TLE Update icon ( globe with lightning bolt)

7. Choose nasabare.txt after clicking on Load TLE on main page.

Dave-KB1PVH

On Tue, Oct 24, 2017 at 9:36 PM, Andrew Rich vk4tec@tech-software.net wrote:

...

Hello

Falconsat-3 is not included in the key data set defined in Orbitron

It is contained in the AMSAT set

I tried adding in the AMSAT set to Orbitron and it does not like it

I stripped the header off the AMSAT group and did a manual import and it worked

Its a bit of a pain now I have got Orbitron working with my SDR # program

Anyone managed to educate Orbitron as to AMSAT keps ?

Andrew _______________________________________________ Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb

---

Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb