Hello,
It’s been some time that I linked my TNC to a dashboard output, and I honestly forgot the setup. I know that the TNC needs to be in KISS mode and there might be a serial port emulator in the setup. If anyone can give me some guidance on the required steps to allow the TNC to talk to the KYSat dashboard I would be very grateful, thank you.
73 Peter WB2OQQ
forward them to me to Bob W7LRD
----- Original Message ----- From: "Peter Portanova" wb2oqq@verizon.net To: AMSAT-BB@amsat.org Sent: Friday, November 22, 2013 4:13:34 PM Subject: [amsat-bb] KySat Dashboard
Hello,
It’s been some time that I linked my TNC to a dashboard output, and I honestly forgot the setup. I know that the TNC needs to be in KISS mode and there might be a serial port emulator in the setup. If anyone can give me some guidance on the required steps to allow the TNC to talk to the KYSat dashboard I would be very grateful, thank you.
73 Peter WB2OQQ
_______________________________________________ Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
participants (2)
-
Bob- W7LRD -
Peter Portanova