What kind of hardware and/or software are people using to decode the 9600 bps cubesats? I've got quite a few 1200 bps options, but nothing that does 9600 bps.
Thanks,
Kelley
Any of the Kenwood APRS radios. D700 D710, D7, D72
Bob
-----Original Message----- From: AMSAT-BB [mailto:[email protected]] On Behalf Of Kelley Sent: Wednesday, May 20, 2015 8:20 PM To: [email protected] Subject: [amsat-bb] 9600 Hardware
What kind of hardware and/or software are people using to decode the 9600 bps cubesats? I've got quite a few 1200 bps options, but nothing that does 9600 bps.
Thanks,
Kelley
Kelley,
I use a sound card direct fed from the 9K6 port of my radios, and the AGW-PE software.
Been using this for years.
BOB KO6TZ
Give the new Direwolf a try.
It has a new technology under the hood that is squeezing every bit of information; again this is pre-alpha but it's working excellent here.
The download URL is here, for linux/windows, take a moment to read the documentation in PDF included on the zip files.
Windows: http://home.comcast.net/~wb2osz/Version%201.2/direwolf-1.2-dev-E-win.zip
Linux: http://home.comcast.net/~wb2osz/Version%201.2/direwolf-1.2-dev-E-src.zip
It can do 300/1200/2400/9600 baud.
Configuration is a little tricky, I known... but you will enjoy the results at the end.
73 from CO7WT.
PS: I use the email via a 9600 packet link that use the new direwolf as TNC on both sides at 9600 baud, of every possible software I tried, this is the best. IMHO.
El 20/05/15 a las 20:20, Kelley escibió:
What kind of hardware and/or software are people using to decode the 9600 bps cubesats? I've got quite a few 1200 bps options, but nothing that does 9600 bps.
Thanks,
Kelley
participants (4)
-
Kelley -
KO6TZ Bob -
Pavel Milanes Costa -
Robert Bruninga