Problem programming SatPC32 Doppler.SQF for ISAT (DStar One) IC-9100 not showing Freq/Mode correctly
![](https://secure.gravatar.com/avatar/a383896a4926d9cbaabb3a5912b6f0c6.jpg?s=120&d=mm&r=g)
Problem.. ISAT (Dstar One) in SatPC32's Doppler file wrong? My IC-9100 is not responding correctly to the following "ISAT,435525,437325,DV,DV,0,0,Voice,U/U" Radio shows "Off" on the 435.520Mhz UHF top freq, but shows TX 145.950Mhz DV on the lower instead of 70cm DV. Steve NS3L
![](https://secure.gravatar.com/avatar/5712ae1058da6e45b63ffbac77d35e75.jpg?s=120&d=mm&r=g)
Are you using SatPC32ISS? The normal SatPC32 program can’t do in-band split.
73,
Paul, N8HM
On Fri, Feb 8, 2019 at 07:39 Steve Nordahl via AMSAT-BB [email protected] wrote:
Problem.. ISAT (Dstar One) in SatPC32's Doppler file wrong? My IC-9100 is not responding correctly to the following "ISAT,435525,437325,DV,DV,0,0,Voice,U/U" Radio shows "Off" on the 435.520Mhz UHF top freq, but shows TX 145.950Mhz DV on the lower instead of 70cm DV. Steve NS3L _______________________________________________ Sent via [email protected]. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
participants (2)
-
Paul Stoetzer
-
Steve Nordahl