Hi Vincenzo,

You'll probably have better luck (and indeed a more accurate response) if you contact the ERC mailing list, as the designer himself is on that group and answers questions very quickly.

The list e-mail address is "Easy_Rotor_Control@yahoogroups.com" so you should be able to find the actual list by searching for that on Yahoo's groups site.

73, John (XLX)

-----Original Message----- From: AMSAT-BB amsat-bb-bounces@amsat.org On Behalf Of Vincenzo Mone Sent: 23 September 2018 12:59 To: Amsat - BBs amsat-bb@Amsat.org Subject: [amsat-bb] Add Switch and LED to ERC-M

Hi folks,

please I need an help.

I own the ERC-M KIT that I use to track the rotators.

Unfortunately it does not have a switch to switch in ON and OFF and also

A LED to see when it is on the ON or on the OFF position.

I would like to add them but do not how to do as the Power connector

is soldered on the printed circuit.

Anybody please can point me how to solder the switch and the LED

And where to solder them?

Also do I need a resistor?

If yes which value and where to put it?

Thanks for the help.

73 de Enzo IK8OZV EasyLog 5 BetaTester EasyLog PDA BetaTester WinBollet BetaTester D.C.I. CheckPoint Regione Campania Skype: ik8ozv8520

*********************************

****** GSM +39 328 7110193 ******

***** SMS +39 328 7110193 *****

*********************************

_______________________________________________ Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb