Isn't there a software program that automatically tunes two rigs so that each remains on a sat's uplink and downlink frequencies during a pass and corrects for doppler?
I recall reading about such a program but now can't find it.
Thanks, Bill NZ5N
Bill Dzurilla wrote:
Isn't there a software program that automatically tunes two rigs so that each remains on a sat's uplink and downlink frequencies during a pass and corrects for doppler?
I recall reading about such a program but now can't find it.
Hi Bill,
WispDDE will control multiple rigs, as many as you have interfaces for !
I've used it with the Kenwood's TS-711 and TS-811 for V/U and U/V modes.
I now have it controlling my IC-910 and TS-850 for when AO7 is in that special mode :)
I use WispDDE with Orbitron to do it all.
regards
Tim
SatPC32 will do this....
73 de Tim, K4SHF
-----Original Message----- From: amsat-bb-bounces@amsat.org [mailto:amsat-bb-bounces@amsat.org] On Behalf Of Bill Dzurilla Sent: Tuesday, March 24, 2009 11:30 PM To: amsat-bb@amsat.org Subject: [amsat-bb] software for two-rig doppler control?
Isn't there a software program that automatically tunes two rigs so that each remains on a sat's uplink and downlink frequencies during a pass and corrects for doppler?
I recall reading about such a program but now can't find it.
Thanks, Bill NZ5N
_______________________________________________ Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
participants (3)
-
Bill Dzurilla -
Tim Tapio -
Tim Tuck