Okay, I'm sad my shack has a huge noise problem at 145.825 :(

Anyhow through the noise I heard 1200 packets from FASTRAC2 (apparently) sending beacons every few minutes, but unable to print packets due to local QRM. Clearly packets being sent, though.

I know others listening without noise could print..hope you have some.

I flipped to FASTRAC1 on 435, but never heard it.

Congrats to team!

(Sigh..now to try to eliminate the noise!)

73,

Mark N8MH

At 07:20 AM 11/20/2010 +0100, Mike Rupprecht wrote:

All,

strong signals of internal communication between FASTRAC-1 and FASTRAC-2 (9k6) on 145.825 MHz

2010-11-20 06:01:56.250 UTC: .F401408101118.38528 0 +0.00 +0.00 +0.00 +0.00000 +0.00000 +0.000000 0 0.073..F421408101118.38528 0 0 2010-11-20 06:01:56.270 UTC: .000000000 0 0.00 +0.000 +0.000 0 0.00 +0.000 +0.000 0 0.00 +0.000 +0.000 2010-11-20 06:01:56.300 UTC: 0 0.00 +0.000 +0.000 0 0.00 +0.000 +0.000 0 0.00 +0.000 +0.000 0 0 2010-11-20 06:01:56.340 UTC: .00 +0.000 +0.000 0 0.00 +0.000 +0.000 0 0.00 +0.000 +0.000 0 0.00

and a beacon signal of Emma (1k2 AFSK)

2010-11-20 06:03:03.360 UTC: [142 Bytes KISS Frame (without CRC)] ctrl: 3 PID: F0 {UI} 123 Payload Bytes from FAST2 to BEACON: F21001408 89519.396884 +6378137.00 +0.00 +0.00 +0.00000 +0.00000 +0.0000358283287 019 020 020 018 033.

73, Mike DK3WN

---

Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

Mark L. Hammond [N8MH]