Hi Steve, I have my Arrow straightened out now from its severely bent elements that occurred on the trip down to TX. Duct Tape is certainly a miracle substance!!! My plan is to be in EL39 tomorrow for SO-50 at 1656Z and switch to FO-29 for the 1708Z passes per the AMSAT on-line predictor. Hope to work you!   73,     Bob  K8BL/5  (Lumberton, TX)

From: Stephen E. Belter seb@wintek.com To: R.T.Liddy k8bl@ameritech.net Sent: Saturday, February 11, 2017 3:36 PM Subject: Re: [amsat-bb] Phasing lines for 2-m Yagi circular polarized project

Bob,

Please let us know when you’ll be in EL39.  My schedule will probably be a challenge, but would love to work you there.

Thank you!

73, Steve N9IP -- Steve Belter, seb@wintek.com

On 2/11/17, 12:45 PM, "AMSAT-BB on behalf of R.T.Liddy" <amsat-bb-bounces@amsat.org on behalf of k8bl@ameritech.net> wrote:

Kevin, Excellent article....thanks for sharing. I've been wanting to put up crossed Yagis for quite a while, but the phasing harness was a question for me. TNX/73,    Bob  K8BL/5  (EM20vg) P.S.  I'm in this area for the next several weeks and planning   to do EM20/EL39/EM30/EM31/EL29 over time once I fix   my bent-up Arrow elements from the trip.

From: Kevin M via AMSAT-BB amsat-bb@amsat.org To: "amsat-bb@amsat.org" amsat-bb@amsat.org Sent: Friday, February 10, 2017 9:28 PM Subject: [amsat-bb] Phasing lines for 2-m Yagi circular polarized project   You may find this page very useful... I don't understand it all, but it sure educated me:  http://www.qsl.net/sv1bsx/antenna-pol/polarization.html

73, Kevin N4UFO

_______________________________________________ Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb