Ed,

What type of device are you using to record the audio? I find it is better to use a recorder that doesn't use an agc network to electronically control the audio dynamics (variations in volume level). I use an Edirol R-1 made by Roland. I don't think the R-1 is still being manufactured, but they may be available through some distribution outlet online. It is a digital flash recorder with the option of controlling the audio input level either manually or by switching in an onboard limiter circuit. This also makes editing the audio files very simple after the contact.

73s,

Dave, AA4KN

-----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Ed Tump Sent: Thursday, November 15, 2007 9:13 PM To: [email protected] Subject: [amsat-bb] Recording passes

Folks,

Tonight I was able to receive and record the AO-51 pass over my QTH at approx 0145UTC. When I listened to the recording it appears I recorded it a little too "hot." What I did was split the audio from the radio and one to the recorder and one to my headset.

What do you folks do?

And thanks to all who have been my Elmers during my current "new guy" phase.

Warm regards,

Ed

KC9GWK Grid EN52

AmSat Member

_______________________________________________ Sent via [email protected]. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb