HELLO, DID I HAVE MY EMCOMM EMAIL MSG SET UP RIGHT WITH UNPROTO CQ VIA ANDE-1,SGATE,WIDE1-1

OR DO I JUST MAKE IT UNPROTO CQ VIA WIDE1-1?

Either will do and also VIA ARISS will do. But ANDE is so low now that it is rare to get an overhead pass (close enough for it to hear you). It is far easier to get your message through on the same frequency and using the same path via ISS which is also on 145.825.

You don't have to do anything different if you use the same path for both... UNPROTO APRS VIA ARISS.

WILL GIVE IT ONE TRY... WILL THIS ALSO WORK WITH ISS?

Oops. Yes, VIA ARISS for both. Bob, WB4APR

KC8GKF

AH IT LOOKS LIKE MY EMAIL NEVER MADE IT OUT FROM THIS PC.

HERE IT WAS:

HAD IT SET UP LIKE THIS UNPROTO CQ VIA ANDE-1,SGATE,WIDE1-1 BT :EMAIL RADIOOPERATOR@COMCAST.NET MSG: HAPPY HOLIDAYS FROM KC8GKF AND FAMILY TEST MSG.

BEACON EVERY 1 MIN

OR SHOULD IT BE : UNPROTO CQ VIA WIDE1-1 BT :EMAIL RADIOOPERATOR@COMCAST.NET MSG: HAPPY HOLIDAYS FROM KC8GKF AND FAMILY TEST MSG.

KC8GKF

HAPPY HOLDIAYS