Whats the trick to get SatPC32 to display multiple satellites via the "M" button?
Larry W7IN
On Mon, December 28, 2009 06:21, Larry Gerhardstein wrote:
Hi Larry,
Whats the trick to get SatPC32 to display multiple satellites via the "M" button?
I think the only trick is to select multiple satellites in your Satellite group. Make sure that they are activated.
Larry W7IN
Good Luck
73's PE0SAT
Go to Satellites, then the Selected column. Highlight the desired satellite, then click the Show On/Off button. If the satellite has an asterisk in front of the letter, it will show up on the Multisat mode.
Alan WA4SCA
-----Original Message----- From: amsat-bb-bounces@amsat.org [mailto:amsat-bb-bounces@amsat.org] On Behalf Of Larry Gerhardstein Sent: 27 December, 2009 23:21 To: amsat-bb@amsat.org Subject: [amsat-bb] multiple sats
Whats the trick to get SatPC32 to display multiple satellites via the "M" button?
Larry W7IN
_______________________________________________ Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
Thanks to all who answered with the same answer to my question about displaying multi-sats. Amazing how well it works to read the instructions. <|:^) 73, Larry W7IN
participants (4)
-
Alan P. Biddle -
Larry Gerhardstein -
Larry Gerhardstein -
PE0SAT