Lib USB!? I thought Howard told me at the symposium (circa 2008) that they were using usb-hid ?!?!?

Howard...? Or was that on the hardware-side?

Joseph Armbruster KJ4JIO

On Tue, Jan 28, 2020 at 9:27 PM James Jipping via AMSAT-BB < amsat-bb@amsat.org> wrote:

Good Evening! While attempting to use my FunCube Pro directly from FoxTelem I get an error: LIBUSB_ERROR_NOT_FOUND. An internet search has found mentions of the error but no solutions for my situation. I am using Windows 10 for the OS on my comupter. Any thoughts or suggestions ??

By the way, I use SDRConsole and feed the audio via VB_Audio Virtual Cable with GREAT results. I even have RSDConsole with WispDDE running the antenna rotor controller. I thought I would try the direct feed FoxTelem- to-FunCube before I set up My Raspberry Pi for "Fox-in-a-Box"

One last question, while I'm here: Is there any way FoxTelem without SDRConsol, with a DDE program , could run the rotor controller?

Thank you for you help.

Jim Jipping, W8MRR AMSAT # 5512 _______________________________________________ Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb