Years ago when I modded my FT-847 to RX 38k4 baud from the pacsats I left everything connected and used a simple multi pole switch to go back and forth. I had everything wired to the same ACC jack. I still have my Symek 38k4/9k6 TNC3S, but no receiver to go with it if anyone is interested :-)

73 Jeff kb2m

-----Original Message----- From: AMSAT-BB [mailto:amsat-bb-bounces@amsat.org] On Behalf Of Vincenzo Mone Sent: Sunday, August 5, 2018 9:11 AM To: Amsat - BBs Subject: [amsat-bb] Terrestrial Data Transmission & 38K4 Baud satellite

Guys, hope in an help. I have mounted the 38k4 Baud into my Kenwood TS-2000X.It has been mounted from the technical that make the 38k4 baud board. When I saw the radio after the modifications I have noticed that, he has used for the RX and TX connections the ACC2 Connector. Now I have two ACC cables that I have to keep plugging and unplugging. I mean when I have to do Terrestrial data communications

like RTTY BPSK Packet etc. I have to use the old ACC2 cable, When I have to use the 38k4 I have to use the new one.

Anybody can suggest me a way to avoid to plug and unplug the cables when necessary? Any help will be really appreciated.

73 de Enzo IK8OZV EasyLog 5 BetaTester EasyLog PDA BetaTester WinBollet BetaTester D.C.I. CheckPoint Regione Campania Skype: ik8ozv8520

*********************************

****** GSM +39 328 7110193 ******

***** SMS +39 328 7110193 *****

*********************************

_______________________________________________ Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb