I recently installed the Sat32PC program and it doesn't look like the program is talking with the radios. I am using an IC-7000 and a FT-100D as the two radios. I have set up both radio's comport information and at this point I do not have a rotor. I see that SatPC32 is tracking as the frequency changes, however, the radios aren't doing anything. What am I missing?
Thank you
Brian, KG8CO
blockquote, div.yahoo_quoted { margin-left: 0 !important; border-left:1px #715FFA solid !important; padding-left:1ex !important; background-color:white !important; } make sure you have correct radios selected in satpc32. ports and baud rate. 73...bruce
Sent from my iPhone
On Thursday, December 31, 2015, 10:40 AM, Brian Sarkisian, KG8CO via AMSAT-BB a[email protected] wrote:
I recently installed the Sat32PC program and it doesn't look like the program is talking with the radios. I am using an IC-7000 and a FT-100D as the two radios. I have set up both radio's comport information and at this point I do not have a rotor. I see that SatPC32 is tracking as the frequency changes, however, the radios aren't doing anything. What am I missing?
Thank you
Brian, KG8CO _______________________________________________ Sent via [email protected] AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
Also, for Icom the address must match what is set in the radio.
*Daryl K4RGK
* On 12/31/2015 11:46 AM, [email protected] wrote:
blockquote, div.yahoo_quoted { margin-left: 0 !important; border-left:1px #715FFA solid !important; padding-left:1ex !important; background-color:white !important; } make sure you have correct radios selected in satpc32. ports and baud rate. 73...bruce
Sent from my iPhone
On Thursday, December 31, 2015, 10:40 AM, Brian Sarkisian, KG8CO via AMSAT-BB [email protected] wrote:
I recently installed the Sat32PC program and it doesn't look like the program is talking with the radios. I am using an IC-7000 and a FT-100D as the two radios. I have set up both radio's comport information and at this point I do not have a rotor. I see that SatPC32 is tracking as the frequency changes, however, the radios aren't doing anything. What am I missing?
Thank you
Brian, KG8CO _______________________________________________ Sent via [email protected] AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
Sent via [email protected] AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
-
Brian Sarkisian, KG8CO -
Daryl Young -
kk5do＠att.net