Has anyone used the StarTech ICUSB232FTN to have SatPC32 control a Yaesu FT-847
![](https://secure.gravatar.com/avatar/7517699fea1cbfad13f90410d5abac6b.jpg?s=120&d=mm&r=g)
Hi all, I am trying to use a newly purchased StarTech ICUSB232FTN (1 port FTDI USB to RS232 Null Modem Adapter) to have SatPC32 control my Yaesu FT-847. For whatever reason, I have not been able to get SatPC32 to control the radio. Has anyone had experience with using this adapter that might have a few tips to pass along? I don't know if it is the adapter itself or a step I might have missed in getting SatPC32 and the FT-847 to work. The adapter when plugged in thinks it is in Com4 so I set SatPC32 to be in Com4 with a delay of 20 and baud rate of 57600. I have also adjusted the radio to use 57600 and have adjusted Com4 to be 57600. But it could be some other settings would work better, so I am open to suggestions. I am using Windows 10 and version 12.8d of SatPC32. Thanks in advance. 73,Charlie Sufana AJ9N
participants (1)
-
aj9n@aol.com