Ted,

Are you using SATPC32ISS? The rig is not capable of operating full duplex on the same band, so if you want to work the ISS on those frequencies, you need to use the special version. The SATPC32ISS does tune both the uplink and downlink, but not as full duplex. More like a standard repeater.

73s,

Alan WA4SCA

-----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Ted Sent: Wednesday, April 18, 2012 2:51 PM To: amsat[email protected] Subject: [amsat-bb] SatPC32 question..& IC910H

I'm stumped..

I have CAT control turned on and ISS selected. In CAT control, I have 144.49 and 145.800 selected and that is what shows in the uplink/downlink widow above the map. SATL function is on in the radio.

BUT, the top window on the radio shows 145.800, but the bottom window (vfo a) shows 437.800. I can't find a way to change that

Any help appreciated. SatPC is v 12.8b registered

73, Ted, K7TRK

_______________________________________________ Sent via [email protected]. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb