Re: Crushcraft A144-10T "VHF Twist" Antenna
Hi Les, N1LF
To built a polarization switching for a crossed yagi Cushcraft A144-10 T is unpractical because the antenna and the phasing harness are using PL connectors and the coax relays are normally supplied with N type connectors.
You can't remove the PL connectors from the phasing harness because they are crimped over two 1/4 electrical length of RG-59/U and one 1/4 electrical lenght of RG-58/U so that cutting and removing the original PL connectors those 1/4 wavelengt lines will became shorter than 90 degrees.
BTW you can rebuild a new phasing line using six N connectors for the phasing line, two N female N barrels connectors,a N type T connector and change the PL with N flanged female connectors over the gamma match arms of both dipoles.
The cost for all N connectors and coax relay will be higher than the cost of a new modern crossed yagi available with switching polarization relay as new in the USA market.
Since your antenna will be mounted inside your large attic and it will stay high and dry, I suggest you to connect your A144-10 T as originally designed connecting the phasing harness for RHCP or LHCP and stay happy with the compromise results obtined.
73" de
i8CVS Domenico
----- Original Message ----- From: "Les Rayburn" les@highnoonfilm.com To: "i8cvs" domenico.i8cvs@tin.it Sent: Friday, October 04, 2013 5:57 AM Subject: Re: [amsat-bb] Crushcraft A144-10T "VHF Twist" Antenna
Domenico,
Thank you for your wise advice. Unfortunately a new cross-polarized antenna is not in the cards right now due to budget.
Would it be possible and practical to build a polarization switching relay for the antenna to allow me to rapidly switch between RHCP and LHCP?
The connectors are not an issue, since it will be mounted inside my large attic. It will stay high and dry.
73,
Les N1LF
On 10/3/2013 10:39 PM, i8cvs wrote:
----- Original Message ----- From: "Les Rayburn" les@highnoonfilm.com To: "AMSAT Mailing List" amsat-bb@amsat.org; starcom-bb@star-com.net Sent: Friday, October 04, 2013 4:18 AM Subject: [amsat-bb] Crushcraft A144-10T "VHF Twist" Antenna
I just acquired a "new" in the-box, never assembled Crushcraft A144-10T "VHF Twist" antenna. It includes the cabling to allow the user to
select
left or right hand polarization. My questions are numerous:
1.) How is the performance on this antenna, compared to more modern designs?
Hi Les,N1LF from Domenico, i8CVS
- I have used the A144-10T since 1973 and compared to modern type it works no so well because the phasing harness to switch polarizations uses crimped PL connectors and you get water and humidity into it.
2.) If I were going to install it inside my attic, should I chose left or right hand polarization?
- To switch between RHCP and LHCP you must screw and unscrew by hand the phasing harness connectors and since the antenna is not equipped with a polarization switching relay you have not the time to switch polarization while operating the satellite.
3.) Any caveats or things to watch out for?
- Do not use the above Cushcraft A144-20 T for the above reason. Buy a modern model of crossed yagi with polarization switching relay between RHCP to LHCP possibly from 2M
Any information that could be provided would be great. I was thrilled when a friend stopped by and asked me if I'd be interested in the antenna. Good price too.
I understand a good price because it is a old model of antenna wich designe is almost back 30 yars ago. BTW the aluminum is a good quality and witstand on the environment for many years.
-- 73,
Les Rayburn, N1LF 121 Mayfair Park Maylene, AL 35114 EM63nf
6M VUCC #1712 AMSAT #38965 Grid Bandits #222 Southeastern VHF Society Central States VHF Society Life Member Six Club #2484
Active on 6 Meters thru 1296, 10GHz & Light
73" de i8CVS Domenico
participants (1)
-
i8cvs