It’s standard business practice, and not new. For a long time, maybe still, Ford had a known RFI problem with fuel pump. They elected to only fix it if someone complained AND had the Ford service bulletin in their hand!
Dan
Sent from here. NM3A
On May 4, 2018, at 17:55, Daniel Schultz n8fgv@usa.net wrote:
Why are they only installing the proper RFI suppression methods on the installations that someone complains about?
They should be putting these RFI suppressors on ALL of their installations. The cost of the necessary components must be negligible compared to the total cost of the installation. Is that modern business practice nowadays?
Dan Schultz N8FGV
I have an ongoing RFI case with the solar panel manufacturer, Solar Edge. Their field engineer, Tom Simpson, has handled many RFI cases in the past so they are aware of the problem.
My case is on schedule for repair and Tom assures me that the RFI will be negligible once the proper RFI suppression methods are installed. The RFI emanates from a neighbors solar panel system about 150 feet from my home.
Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
participants (1)
-
Mail