hi, maybe some of the older chaps might remember this kind of jack. I would like to know where i could buy one and if someone could send me a diagram how to make a cord to go from the geloso (3pin out-put plug) to a 1/4 mono jack. Hope all had a very good new year. 73 de ve6itv Scott
Hi Scott,
A 3 pin jack female 17 mm outside diameter was used by Geloso to connect the cord of a microphone into a 3 pin male socket 20 mm in diameter fitted into the front panel of a Transmitter G 4/225 in my hand.
In general Geloso uses the above non standar connector in all models of RX/TX for radioamateurs early in the 1950-1960
If this is your case I can send to you a scanned copy of the original schematic diagram.
73" de
i8CVS Domenico
----- Original Message ----- From: "Scott Smith" ve6itv@shaw.ca To: "amsat" amsat-bb@amsat.org Sent: Sunday, January 13, 2008 6:13 AM Subject: [amsat-bb] geloso 3-pin jack
hi, maybe some of the older chaps might remember this kind of jack. I
would like to know where i could buy one and if someone could send me a diagram how to make a cord to go from the geloso (3pin out-put plug) to a 1/4 mono jack. Hope all had a very good new year. 73 de ve6itv Scott
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
participants (2)
-
i8cvs -
Scott Smith