Howdy! I want to connect a Icom 7100 to satpc32. Anyone know the baud and access code for this radio. If I can get this to work I will add my ft 817 as second radio. Thanksjim KI6WJ
Jim, check the 'help' drop down...there are specific instructions for the Icom, Kenwood, Yaesu...might be in 'auxiliary files'
GL, K7TRK
-----Original Message----- From: AMSAT-BB [mailto:[email protected]] On Behalf Of James Brown Sent: Tuesday, August 21, 2018 3:41 PM To: AMSAT BB Subject: [amsat-bb] sat32 and ic7100
Howdy! I want to connect a Icom 7100 to satpc32. Anyone know the baud and access code for this radio. If I can get this to work I will add my ft 817 as second radio. Thanksjim KI6WJ _______________________________________________ Sent via [email protected]. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
Hi James the lists of supported Icom radios (Radio 1 and Radio 2 sections of menu 'Radio Setup') don't contain the IC-7100. Choose IC-7000 as model, but the Icom address of the IC-7100. Set the CAT baud rate as high as possible (19200), at any rate equal at the radio and in the program. CAT delay if the IC-7100 is Radio 1: Start with 50.
73, Erich, DK1TB
Am 22.08.2018 um 00:40 schrieb James Brown:
Howdy! I want to connect a Icom 7100 to satpc32. Anyone know the baud and access code for this radio. If I can get this to work I will add my ft 817 as second radio. Thanksjim KI6WJ _______________________________________________ Sent [email protected]. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings:http://www.amsat.org/mailman/listinfo/amsat-bb
In 'Radio Setup' choose the IC-7000 as model but the IC-7100 address. Use 19200 bd at the PC and the radio. 73s, Erich, DK1TB
Am 22.08.2018 um 00:40 schrieb James Brown:
Howdy! I want to connect a Icom 7100 to satpc32. Anyone know the baud and access code for this radio. If I can get this to work I will add my ft 817 as second radio. Thanksjim KI6WJ _______________________________________________ Sent via [email protected]. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
participants (3)
-
Erich Eichmann -
James Brown -
Ted Krempa