Andrew Rich wrote:

wrong hobby

Says the man who spams APRSSIG with off-topic programming questions that can be answered with a few Google searches. If you have nothing constructive to say, don't reply. In conclusion, please pull your bottom lip over your head and swallow.

Ah, the felt good.

Now, George:

On this last pass of HO-68 at 2216 L AOS I heard nothing on ssb,cw or fm. The foot print of Satpc32 showed all US.What am I doing wrong, I have downloaded latest keps. George

As Drew stated, the FM and transponder are not always on all the time, but the CW beacon should always be going. I have no idea about your skill level, so let me suggest basics:

* Are you sure you're on the right frequency? * Are you compensating for doppler? * Everything connected correctly? * Can you hear other sats?

Hope this helps and that's it something simple.

~Ben

May have made an error on the AOS time I had 1st wrote 16:05 utc I believe it should be 16:29 utc For my location Howard VE4ISP

----- Original Message ----- From: "Howard Kowall" [email protected] To: "[email protected]" [email protected] Sent: Tuesday, January 05, 2010 10:04 AM Subject: [amsat-bb] Re: help

Good Morning Also the schedule of HO-68 can be seen at the following link http://www.camsat.cn/ At this link you can see when and which mode is active (Time is in UTC) So far I have herd nothing also ( lol) But I did not listen for the beacon,which I will do on the next path 16:05 utc,Should be over North America I hope this helps a little and that I am correct Good Luck Howard VE4ISP

----- Original Message ----- From: "Ben Jackson" [email protected] To: "Andrew Rich" [email protected] Cc: "amsat-bb" [email protected]; "w3vvp" [email protected] Sent: Tuesday, January 05, 2010 9:36 AM Subject: [amsat-bb] Re: help

...

Andrew Rich wrote:

...

wrong hobby

Says the man who spams APRSSIG with off-topic programming questions that can be answered with a few Google searches. If you have nothing constructive to say, don't reply. In conclusion, please pull your bottom lip over your head and swallow.

Ah, the felt good.

Now, George:

...

On this last pass of HO-68 at 2216 L AOS I heard nothing on ssb,cw or fm. The foot print of Satpc32 showed all US.What am I doing wrong, I have downloaded latest keps. George

As Drew stated, the FM and transponder are not always on all the time, but the CW beacon should always be going. I have no idea about your skill level, so let me suggest basics:

• Are you sure you're on the right frequency?
• Are you compensating for doppler?
• Everything connected correctly?
• Can you hear other sats?

Hope this helps and that's it something simple.

~Ben

-- Ben Jackson - N1WBV - New Bedford, MA bbj <at> innismir.net - http://www.innismir.net/ _______________________________________________ Sent via [email protected]. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

---

Sent via [email protected]. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb