K9STH wrote:

Sorry, but NFPA NEC (National Electrical Code) definitely requires that ALL grounding electrodes MUST be connected together! There are VERY good reasons for doing this...

Yeah, this is a requirement that has vexed designers of complex electrical systems for years. One solution, generally meeting this requirement, is to go ahead an utilize separate ground rods and tie the rods together with a (large) grounding cable--usually pvc insulated cable for corrosion protection. In industrial installations these connections are often made so they can be disconnected in the event of differential currents flowing and causing problems with communication/signal systems.

Much like K8BL's recommendations, I too have used #10 AWG for the ground from the rotor/mast to the ground rod, and hoped and prayed the lightning liked it (if ever needed). This is especially important for a non-earthed installation like a tripod on a roof. I have been fortunate to never having to find out...

73, Jerry, M0GOE