All,
Separations between the objects from the SSO-A launch are remarkably small, some no more than 1 or 2 s. And not all TLE sets have been published yet. So identifying objects is hard for the time being. But for tracking purposes I have some suggestions.
For JY1Sat use object 43759, for ITASat 1 use object 43760, for Fox 1Cliff use object 43767 and for Move 2 use object 43761. These should work well for now. But note that these assignments may change later on.
73, Nico PA0DLO
Another suggestion: for ESEO use object 43763.
73, Nico PA0DLO
On 04-12-18 23:17, Nico Janssen wrote:
All,
Separations between the objects from the SSO-A launch are remarkably small, some no more than 1 or 2 s. And not all TLE sets have been published yet. So identifying objects is hard for the time being. But for tracking purposes I have some suggestions.
For JY1Sat use object 43759, for ITASat 1 use object 43760, for Fox 1Cliff use object 43767 and for Move 2 use object 43761. These should work well for now. But note that these assignments may change later on.
73, Nico PA0DLO
Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
New suggestions: for AO 95 (ex Fox 1Cliff) now use object 43774, for MOVE-II now use object 43775, and for PWSat 2 use object 43776.
Again: this may change later on when separations increase and new TLE sets become available. Currently only 14 TLE sets have been published for the 64+ objects from this launch.
73, Nico PA0DLO
On 05-12-18 14:22, Nico Janssen wrote:
Another suggestion: for ESEO use object 43763.
73, Nico PA0DLO
On 04-12-18 23:17, Nico Janssen wrote:
All,
Separations between the objects from the SSO-A launch are remarkably small, some no more than 1 or 2 s. And not all TLE sets have been published yet. So identifying objects is hard for the time being. But for tracking purposes I have some suggestions.
For JY1Sat use object 43759, for ITASat 1 use object 43760, for Fox 1Cliff use object 43767 and for Move 2 use object 43761. These should work well for now. But note that these assignments may change later on.
73, Nico PA0DLO
Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
With a lot of new TLE sets available, some new suggestions: for JY1Sat now use object 43788 or 43759 (separation is less than 1 s), for ITASat 1 now use object 43787, and for MOVE-II now use object 43776. For RANGE-A use object 43798, and for PWSat 2 now use object 43780. Either MinXSS 2 or CSIM is object 43793.
73, Nico PA0DLO
On 06-12-18 12:34, Nico Janssen wrote:
New suggestions: for AO 95 (ex Fox 1Cliff) now use object 43774, for MOVE-II now use object 43775, and for PWSat 2 use object 43776.
Again: this may change later on when separations increase and new TLE sets become available. Currently only 14 TLE sets have been published for the 64+ objects from this launch.
73, Nico PA0DLO
On 05-12-18 14:22, Nico Janssen wrote:
Another suggestion: for ESEO use object 43763.
73, Nico PA0DLO
On 04-12-18 23:17, Nico Janssen wrote:
All,
Separations between the objects from the SSO-A launch are remarkably small, some no more than 1 or 2 s. And not all TLE sets have been published yet. So identifying objects is hard for the time being. But for tracking purposes I have some suggestions.
For JY1Sat use object 43759, for ITASat 1 use object 43760, for Fox 1Cliff use object 43767 and for Move 2 use object 43761. These should work well for now. But note that these assignments may change later on.
73, Nico PA0DLO
Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
With updated TLE sets the best fit for JY1Sat is now object 43788 and for AO-95 (ex Fox 1Cliff) it is now 43770 (separation with 43771 is only 1 s). But these fits are not perfect. Apparently their TLEs have not yet been published.
73, Nico PA0DLO
On 07-12-18 16:39, Nico Janssen wrote:
With a lot of new TLE sets available, some new suggestions: for JY1Sat now use object 43788 or 43759 (separation is less than 1 s), for ITASat 1 now use object 43787, and for MOVE-II now use object 43776. For RANGE-A use object 43798, and for PWSat 2 now use object 43780. Either MinXSS 2 or CSIM is object 43793.
73, Nico PA0DLO
On 06-12-18 12:34, Nico Janssen wrote:
New suggestions: for AO 95 (ex Fox 1Cliff) now use object 43774, for MOVE-II now use object 43775, and for PWSat 2 use object 43776.
Again: this may change later on when separations increase and new TLE sets become available. Currently only 14 TLE sets have been published for the 64+ objects from this launch.
73, Nico PA0DLO
On 05-12-18 14:22, Nico Janssen wrote:
Another suggestion: for ESEO use object 43763.
73, Nico PA0DLO
On 04-12-18 23:17, Nico Janssen wrote:
All,
Separations between the objects from the SSO-A launch are remarkably small, some no more than 1 or 2 s. And not all TLE sets have been published yet. So identifying objects is hard for the time being. But for tracking purposes I have some suggestions.
For JY1Sat use object 43759, for ITASat 1 use object 43760, for Fox 1Cliff use object 43767 and for Move 2 use object 43761. These should work well for now. But note that these assignments may change later on.
73, Nico PA0DLO
Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
Hi Nico,
good work :-) Thank you!
43784 is a good suggestion for SnugLite - could you check, please?
73 Mike DK3WN
-----Ursprüngliche Nachricht----- Von: AMSAT-BB [mailto:amsat-bb-bounces@amsat.org] Im Auftrag von Nico Janssen Gesendet: 08 December 2018 15:25 An: amsat-bb@amsat.org; Ray Hoad Betreff: Re: [amsat-bb] Tracking objects from the SSO-A launch
With updated TLE sets the best fit for JY1Sat is now object 43788 and for AO-95 (ex Fox 1Cliff) it is now 43770 (separation with 43771 is only 1 s). But these fits are not perfect. Apparently their TLEs have not yet been published.
73, Nico PA0DLO
On 07-12-18 16:39, Nico Janssen wrote:
With a lot of new TLE sets available, some new suggestions: for JY1Sat now use object 43788 or 43759 (separation is less than 1 s), for ITASat 1 now use object 43787, and for MOVE-II now use object 43776. For RANGE-A use object 43798, and for PWSat 2 now use object 43780. Either MinXSS 2 or CSIM is object 43793.
73, Nico PA0DLO
On 06-12-18 12:34, Nico Janssen wrote:
New suggestions: for AO 95 (ex Fox 1Cliff) now use object 43774, for MOVE-II now use object 43775, and for PWSat 2 use object 43776.
Again: this may change later on when separations increase and new TLE sets become available. Currently only 14 TLE sets have been published for the 64+ objects from this launch.
73, Nico PA0DLO
On 05-12-18 14:22, Nico Janssen wrote:
Another suggestion: for ESEO use object 43763.
73, Nico PA0DLO
On 04-12-18 23:17, Nico Janssen wrote:
All,
Separations between the objects from the SSO-A launch are remarkably small, some no more than 1 or 2 s. And not all TLE sets have been published yet. So identifying objects is hard for the time
being.
But for tracking purposes I have some suggestions.
For JY1Sat use object 43759, for ITASat 1 use object 43760, for Fox 1Cliff use object 43767 and for Move 2 use object 43761. These should work well for now. But note that these assignments may change later on.
73, Nico PA0DLO
Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring
membership.
Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring
membership.
Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
_______________________________________________ Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
Hi Mike,
OK, I'll give it a try. Btw today I saw a couple of weak transmissions from VO 96 around 11:02 UTC.
73, Nico
On 08-12-18 16:15, Mike Rupprecht wrote:
Hi Nico,
good work :-) Thank you!
43784 is a good suggestion for SnugLite - could you check, please?
73 Mike DK3WN
-----Ursprüngliche Nachricht----- Von: AMSAT-BB [mailto:amsat-bb-bounces@amsat.org] Im Auftrag von Nico Janssen Gesendet: 08 December 2018 15:25 An: amsat-bb@amsat.org; Ray Hoad Betreff: Re: [amsat-bb] Tracking objects from the SSO-A launch
With updated TLE sets the best fit for JY1Sat is now object 43788 and for AO-95 (ex Fox 1Cliff) it is now 43770 (separation with 43771 is only 1 s). But these fits are not perfect. Apparently their TLEs have not yet been published.
73, Nico PA0DLO
On 07-12-18 16:39, Nico Janssen wrote:
With a lot of new TLE sets available, some new suggestions: for JY1Sat now use object 43788 or 43759 (separation is less than 1 s), for ITASat 1 now use object 43787, and for MOVE-II now use object 43776. For RANGE-A use object 43798, and for PWSat 2 now use object 43780. Either MinXSS 2 or CSIM is object 43793.
73, Nico PA0DLO
On 06-12-18 12:34, Nico Janssen wrote:
New suggestions: for AO 95 (ex Fox 1Cliff) now use object 43774, for MOVE-II now use object 43775, and for PWSat 2 use object 43776.
Again: this may change later on when separations increase and new TLE sets become available. Currently only 14 TLE sets have been published for the 64+ objects from this launch.
73, Nico PA0DLO
On 05-12-18 14:22, Nico Janssen wrote:
Another suggestion: for ESEO use object 43763.
73, Nico PA0DLO
On 04-12-18 23:17, Nico Janssen wrote:
All,
Separations between the objects from the SSO-A launch are remarkably small, some no more than 1 or 2 s. And not all TLE sets have been published yet. So identifying objects is hard for the time
being.
But for tracking purposes I have some suggestions.
For JY1Sat use object 43759, for ITASat 1 use object 43760, for Fox 1Cliff use object 43767 and for Move 2 use object 43761. These should work well for now. But note that these assignments may change later on.
73, Nico PA0DLO
Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring
membership.
Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring
membership.
Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
Hi Nico, the NASA.bare appears to now have all the new ones listed
73, Ted K7TRK
-----Original Message----- From: AMSAT-BB [mailto:amsat-bb-bounces@amsat.org] On Behalf Of Nico Janssen Sent: Saturday, December 8, 2018 6:25 AM To: amsat-bb@amsat.org; Ray Hoad Subject: Re: [amsat-bb] Tracking objects from the SSO-A launch
With updated TLE sets the best fit for JY1Sat is now object 43788 and for AO-95 (ex Fox 1Cliff) it is now 43770 (separation with 43771 is only 1 s). But these fits are not perfect. Apparently their TLEs have not yet been published.
73, Nico PA0DLO
On 07-12-18 16:39, Nico Janssen wrote:
With a lot of new TLE sets available, some new suggestions: for JY1Sat now use object 43788 or 43759 (separation is less than 1 s), for ITASat 1 now use object 43787, and for MOVE-II now use object 43776. For RANGE-A use object 43798, and for PWSat 2 now use object 43780. Either MinXSS 2 or CSIM is object 43793.
73, Nico PA0DLO
On 06-12-18 12:34, Nico Janssen wrote:
New suggestions: for AO 95 (ex Fox 1Cliff) now use object 43774, for MOVE-II now use object 43775, and for PWSat 2 use object 43776.
Again: this may change later on when separations increase and new TLE sets become available. Currently only 14 TLE sets have been published for the 64+ objects from this launch.
73, Nico PA0DLO
On 05-12-18 14:22, Nico Janssen wrote:
Another suggestion: for ESEO use object 43763.
73, Nico PA0DLO
On 04-12-18 23:17, Nico Janssen wrote:
All,
Separations between the objects from the SSO-A launch are remarkably small, some no more than 1 or 2 s. And not all TLE sets have been published yet. So identifying objects is hard for the time being. But for tracking purposes I have some suggestions.
For JY1Sat use object 43759, for ITASat 1 use object 43760, for Fox 1Cliff use object 43767 and for Move 2 use object 43761. These should work well for now. But note that these assignments may change later on.
73, Nico PA0DLO
Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
_______________________________________________ Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
Further suggestions: for Suomi100 use object 43788, for CSIM use object 43793, for MinXSS 2 use object 43758, and for SnugLite use object 43786.
Still no TLE set for Jordan-OSCAR 97 (ex JY1Sat) from SpaceTrack.org. Therefore I determined these TLEs myself from doppler measurements:
Jordan-OSCAR 97 1 60001U 18601A 18343.03869085 .00000100 00000-0 15114-4 0 01 2 60001 97.7674 52.0912 0012867 257.7608 103.0072 14.95132150 01
73, Nico PA0DLO
On 08-12-18 15:25, Nico Janssen wrote:
With updated TLE sets the best fit for JY1Sat is now object 43788 and for AO-95 (ex Fox 1Cliff) it is now 43770 (separation with 43771 is only 1 s). But these fits are not perfect. Apparently their TLEs have not yet been published.
73, Nico PA0DLO
On 07-12-18 16:39, Nico Janssen wrote:
With a lot of new TLE sets available, some new suggestions: for JY1Sat now use object 43788 or 43759 (separation is less than 1 s), for ITASat 1 now use object 43787, and for MOVE-II now use object 43776. For RANGE-A use object 43798, and for PWSat 2 now use object 43780. Either MinXSS 2 or CSIM is object 43793.
73, Nico PA0DLO
On 06-12-18 12:34, Nico Janssen wrote:
New suggestions: for AO 95 (ex Fox 1Cliff) now use object 43774, for MOVE-II now use object 43775, and for PWSat 2 use object 43776.
Again: this may change later on when separations increase and new TLE sets become available. Currently only 14 TLE sets have been published for the 64+ objects from this launch.
73, Nico PA0DLO
On 05-12-18 14:22, Nico Janssen wrote:
Another suggestion: for ESEO use object 43763.
73, Nico PA0DLO
On 04-12-18 23:17, Nico Janssen wrote:
All,
Separations between the objects from the SSO-A launch are remarkably small, some no more than 1 or 2 s. And not all TLE sets have been published yet. So identifying objects is hard for the time being. But for tracking purposes I have some suggestions.
For JY1Sat use object 43759, for ITASat 1 use object 43760, for Fox 1Cliff use object 43767 and for Move 2 use object 43761. These should work well for now. But note that these assignments may change later on.
73, Nico PA0DLO
Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
Still no TLE set for Suomi 100 is published by Space-Track.org. Therefore I determined these TLEs myself from doppler measurements:
Suomi 100 1 60002U 18601B 18344.10953523 .00000010 00000-0 70016-5 0 05 2 60002 97.7672 53.2430 0010803 228.0410 133.0649 14.95134223 04
73, Nico PA0DLO
On 09-12-18 14:36, Nico Janssen wrote:
Further suggestions: for Suomi100 use object 43788, for CSIM use object 43793, for MinXSS 2 use object 43758, and for SnugLite use object 43786.
Still no TLE set for Jordan-OSCAR 97 (ex JY1Sat) from SpaceTrack.org. Therefore I determined these TLEs myself from doppler measurements:
Jordan-OSCAR 97 1 60001U 18601A 18343.03869085 .00000100 00000-0 15114-4 0 01 2 60001 97.7674 52.0912 0012867 257.7608 103.0072 14.95132150 01
73, Nico PA0DLO
On 08-12-18 15:25, Nico Janssen wrote:
With updated TLE sets the best fit for JY1Sat is now object 43788 and for AO-95 (ex Fox 1Cliff) it is now 43770 (separation with 43771 is only 1 s). But these fits are not perfect. Apparently their TLEs have not yet been published.
73, Nico PA0DLO
On 07-12-18 16:39, Nico Janssen wrote:
With a lot of new TLE sets available, some new suggestions: for JY1Sat now use object 43788 or 43759 (separation is less than 1 s), for ITASat 1 now use object 43787, and for MOVE-II now use object 43776. For RANGE-A use object 43798, and for PWSat 2 now use object 43780. Either MinXSS 2 or CSIM is object 43793.
73, Nico PA0DLO
On 06-12-18 12:34, Nico Janssen wrote:
New suggestions: for AO 95 (ex Fox 1Cliff) now use object 43774, for MOVE-II now use object 43775, and for PWSat 2 use object 43776.
Again: this may change later on when separations increase and new TLE sets become available. Currently only 14 TLE sets have been published for the 64+ objects from this launch.
73, Nico PA0DLO
On 05-12-18 14:22, Nico Janssen wrote:
Another suggestion: for ESEO use object 43763.
73, Nico PA0DLO
On 04-12-18 23:17, Nico Janssen wrote:
All,
Separations between the objects from the SSO-A launch are remarkably small, some no more than 1 or 2 s. And not all TLE sets have been published yet. So identifying objects is hard for the time being. But for tracking purposes I have some suggestions.
For JY1Sat use object 43759, for ITASat 1 use object 43760, for Fox 1Cliff use object 43767 and for Move 2 use object 43761. These should work well for now. But note that these assignments may change later on.
73, Nico PA0DLO
Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
participants (3)
-
Mike Rupprecht -
Nico Janssen -
Ted Krempa