----- Original Message ----- From: "Edward Cole" [email protected] To: "George Henry" [email protected] Sent: Tuesday, January 20, 2009 11:37 PM Subject: Re: [amsat-bb] Re: springtime project
[snip]
You can separate the elevation section from the azimuth section of the B5400. Then you attach the elevation section to the side of the mast with a custom-made bracket.
73, Ed - KL7UW
Ahhhh.... custom bracket. Shoulda thought of that.....
DOH!
You can also get a separation kit from Yaesu that lets you mount the rotors apart. I've got one and it works fine. Jim KQ6EA
--- On Wed, 1/21/09, George Henry [email protected] wrote:
From: George Henry [email protected] Subject: [amsat-bb] Re: springtime project To: "amsat bb" [email protected] Date: Wednesday, January 21, 2009, 4:03 PM ----- Original Message ----- From: "Edward Cole" [email protected] To: "George Henry" [email protected] Sent: Tuesday, January 20, 2009 11:37 PM Subject: Re: [amsat-bb] Re: springtime project
[snip]
You can separate the elevation section from the
azimuth section of
the B5400. Then you attach the elevation section to
the side of the
mast with a custom-made bracket.
73, Ed - KL7UW
Ahhhh.... custom bracket. Shoulda thought of that.....
DOH!
Sent via [email protected]. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
participants (2)
-
George Henry
-
Jim Jerzycke