Hi Chris,

Got it! I just ran another pass and got an additional 128 decodes and I see that my call is listed on the FOX telemetry page as having received my upload so it's all good.

Tnx! Mike

On 2/6/2016 12:29 PM, Chris Thompson wrote:

Hi Mike, yes that should really be a feature, but it isn't. It is somewhere on the to-do list.

If you recorded the pass you can replay it through FoxTelem. Even though it will not decode additional Frames, it will queue them for upload.

73 Chris

On Sat, Feb 6, 2016 at 11:08 AM, Mike Seguin <n1jez@burlingtontelecom.net mailto:n1jez@burlingtontelecom.net> wrote:

I just hooked up my FT-847 9k6 output to the Fox Telemetry decoder
vers 1.03

There was a decent pass over VT just now and I see 82 decodes.

My question is: in the settings screen, I didn't have 'upload to
server' checked so nothing uploaded. Is it possible to send that
data after the pass? (I now have 'upload to server' checked)

Mike
--

73,
Mike, N1JEZ
"A closed mouth gathers no feet"
_______________________________________________
Sent via AMSAT-BB@amsat.org <mailto:AMSAT-BB@amsat.org>. AMSAT-NA
makes this open forum available
to all interested persons worldwide without requiring membership.
Opinions expressed
are solely those of the author, and do not reflect the official
views of AMSAT-NA.
Not an AMSAT-NA member? Join now to support the amateur satellite
program!
Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb

-- Chris E. Thompson chrisethompson@gmail.com mailto:chrisethompson@gmail.com g0kla@arrl.net mailto:g0kla@arrl.net