![](https://secure.gravatar.com/avatar/c584d88f42079a1f5ebde0a3478059a3.jpg?s=120&d=mm&r=g)
Attempting to set up ISS voice frequencies on a Yaesu FT-847 using OmniRig CAT control. Enter 145.800 FM for RX and 144.490 FM for TX. Rig recognizes frequencies when ISS is selected, and tracks for doppler. When I push PTT, I get "ERROR" on the TX Frequency. Any thoughts on how to correct the problem?
Loon NA1SA
![](https://secure.gravatar.com/avatar/95e24a6d8135a8fc9be5902b5d3f98ca.jpg?s=120&d=mm&r=g)
Loon,
The 847 can’t handle the same band in both VFOs when in Sat mode. Your best bet is to use SPLIT with Sat mode off. This is what I’ve been doing for ISS packet with reasonable success.
73, Mike
Michael Styne K2MTS [email protected]
Michael Styne K2MTS [email protected]
On Feb 10, 2019, at 08:02, NA1SA Loon ?? [email protected] wrote:
Attempting to set up ISS voice frequencies on a Yaesu FT-847 using OmniRig CAT control. Enter 145.800 FM for RX and 144.490 FM for TX. Rig recognizes frequencies when ISS is selected, and tracks for doppler. When I push PTT, I get "ERROR" on the TX Frequency.
participants (2)
-
Michael Styne
-
NA1SA Loon ??