Mike

You might take a look at MixW , AWGPE or Packet Engine Pro for decoding packet. These are software modems so you won't need a TNC.

If you are decoding 9600 Baud packets, make sure you get your audio output from pin 4 of the 910H main or sub band data sockets, use pin 5 for 1200 baud.

Programs like Fldigi, DM780 or CWskimmer could be used to decode CW .

Dave

-----Original Message----- From: amsat-bb-bounces@amsat.org [mailto:amsat-bb-bounces@amsat.org] On Behalf Of Mike Sprenger Sent: Saturday, May 18, 2013 7:33 AM To: amsat-bb@amsat.org Subject: [amsat-bb] Satellite telemetry decoding

Hi,

So I've got satpc32 running rotors and radios automatically. Radio is ic-910h.

I have Interest to record and decode CW satellite telemetry to text and then use the DK3WN tools to decode.

Any suggestion for two things:

1. what to use to record the audio from the radio automatically ? 2. what software to decode the CW to text from the CW beacons ?

Thanks Mike W4UOO

_______________________________________________ Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb