Thank you Pedro, but that's not the question.
We are trying to use these TNCs with our own protocol. Not AX.25. They work fine using AX.25 and KISS. But in KISS they will not pass our non-AX.25 protocol.
The SPIRIT works fine with our protocol.
So we are looking for clues as to how to get them to work in KISS with a protocol that is simply data wrapped in flags.
Jim
Quoting Pedro Cruz pccu2jx@sapo.pt:
Hi Jim
I have the TNC3S and it work just fine in kiss mode with serval software.
Best 73 !
Pedro Cruz - cu2jx ----- Original Message ----- From: jjwhite@myawai.com To: amsat-bb@amsat.org Sent: Thursday, April 19, 2007 6:51 PM Subject: [amsat-bb] SYMEK TNC
I would appreciate hearing from anyone who has successfully used a TNC3 or TNC31 with any protocol other than AX.25 or TCP/IP, in KISS mode.
Jim jim@coloardosatellite.com wd0e@amsat.org
This message was sent using IMP, the Internet Messaging Program.
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
---------------------------------------------------------------- This message was sent using IMP, the Internet Messaging Program.
participants (1)
-
jjwhite＠myawai.com