Anyone using an icom 910 on 9600 baud packet ?
Where do you connect on radio ?
A
Sent from my iPhone
The manual is pretty clear about that. You do have the instruction manual? --- Ciao baby, catch you on the flip side. GEO
Time flies like an arrow, fruit flies like a banana.
From: Andrew Rich vk4tec@internode.on.net To: amsat-bb@amsat.org Sent: Tuesday, August 8, 2017 4:15 PM Subject: [amsat-bb] Icom 910 / 9600 baud
Anyone using an icom 910 on 9600 baud packet ?
Where do you connect on radio ?
A
Sent from my iPhone _______________________________________________ Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
Not actually doing 9600 baud packet myself, but the data connectors on the back use pin 1 for 1200/9600 data in, pin 2 is ground, pin 3 PTT, pin 4 9600 data out, pin 5 1200 data out, and pin 6 SQL status (LOW when open, 8V when closed).
George, KA3HSW
-----Original Message----- From: AMSAT-BB [mailto:amsat-bb-bounces@amsat.org] On Behalf Of Andrew Rich Sent: Tuesday, August 08, 2017 6:12 PM To: amsat-bb@amsat.org Subject: [amsat-bb] Icom 910 / 9600 baud
Anyone using an icom 910 on 9600 baud packet ?
Where do you connect on radio ?
A
Perfect thanks George
I noted some menu settings in the radio as well
Cheers thanks for that
Sent from my iPhone
On 9 Aug 2017, at 10:57 am, George Henry ka3hsw@att.net wrote:
Not actually doing 9600 baud packet myself, but the data connectors on the back use pin 1 for 1200/9600 data in, pin 2 is ground, pin 3 PTT, pin 4 9600 data out, pin 5 1200 data out, and pin 6 SQL status (LOW when open, 8V when closed).
George, KA3HSW
-----Original Message----- From: AMSAT-BB [mailto:amsat-bb-bounces@amsat.org] On Behalf Of Andrew Rich Sent: Tuesday, August 08, 2017 6:12 PM To: amsat-bb@amsat.org Subject: [amsat-bb] Icom 910 / 9600 baud
Anyone using an icom 910 on 9600 baud packet ?
Where do you connect on radio ?
A
participants (3)
-
Andrew Rich
-
GEO Badger
-
George Henry