Zack,

Yes, there is software available that can decode packet without a TNC, visit this site, I believe it will answer your questions. http://www.kc2rlm.info/soundcardpacket/

73- Pete WB2OQQ www.massapequanyweather.com http://www.qrz.com/db/WB2OQQ?

Sure, UISS and AGWPE with a sound card interface like a Signalink USB or a homebrew interface. Works like a champ.

http://www.kc2rlm.info/soundcardpacket/

Craig N6RSX

-----Original Message----- From: amsat-bb-bounces@amsat.org [mailto:amsat-bb-bounces@amsat.org] On Behalf Of vtnn43e@comcast.net Sent: Friday, December 17, 2010 11:10 AM To: AMSAT Subject: [amsat-bb] Is there software to decode packet without a TNC?

Is there software to decode packet without a TNC?

I would like to decode transmissions from the satellites but don't have a need to transmit and was wondering if such a program exists.

Zack

N8FNR _______________________________________________ Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

NOTICE: This communication may contain privileged or other confidential information. If you are not the intended recipient of this communication, or an employee or agent responsible for delivering this communication to the intended recipient, please advise the sender by reply email and immediately delete the message and any attachments without copying or disclosing the contents. Thank you.

Is there software to decode packet without a TNC?

I've been recording passes and decoding .wav files after the fact with TrueTTY. No need for a rig/soundcard interface. It's a bit clumsy, but easy. My satellite ops are all portable and I don't have a notebook computer.

73, Scott N1AIA