Howdy,
A while ago I seem to remember a discussion on availability of the small push on RF connectors used inside the FT-736R to interconnect boards. These same connectors are used in quite a few radios. They were a crimp on style.
Anyone remember the source?
Tnx
73, Mike N1JEZ AMSAT #29649 "A closed mouth gathers no feet"
Hi Mike, N1JEZ
I don't have a FT-736R but if the small push on RF connector plug is female and the jack is a male they probably are SMB connectors normally used also by HP to interconnect the modules inside the instruments.
Look here to see in the catalog pag H-17 if they really match the type you need.
http://www.rfmicrowave.it/pdf/connettori.pdf
If so you can find the SMB connectors with easy in USA
I remember many interesting contacts with you on AO40 mode L/S and the AO40 S1/K test early 02/23/2003............when the new P3-E ?
73" de
i8CVS Domenico
----- Original Message ----- From: [email protected] To: "AMSAT BB" [email protected]; "VHF" [email protected] Sent: Tuesday, April 29, 2008 1:20 PM Subject: [amsat-bb] RF connectors in 736R
Howdy,
A while ago I seem to remember a discussion on availability of the small push on RF connectors used inside the FT-736R to interconnect boards.
These
same connectors are used in quite a few radios. They were a crimp on
style.
Anyone remember the source?
Tnx
73, Mike N1JEZ AMSAT #29649 "A closed mouth gathers no feet"
Sent via [email protected]. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
Hi Domenico,
Yes a long time since we made those contacts. I still have all the 24 GHz receive equipment. The system has been upgraded with a 2 foot dish with circular feed and 1.3 dB nf preamp.
I also have 47 GHz equipment ready.
I can't wait for P3E.
73, Mike N1JEZ AMSAT #29649 "A closed mouth gathers no feet"
----- Original Message -----
Hi Mike, N1JEZ I remember many interesting contacts with you on AO40 mode L/S and the AO40 S1/K test early 02/23/2003............when the new P3-E ?
Hi Domenico,
Yes a long time since we made those contacts. I still have all the 24 GHz receive equipment. The system has been upgraded with a 2 foot dish with circular feed and 1.3 dB nf preamp.
I also have 47 GHz equipment ready.
I can't wait for P3E.
Good, Mike and Dom!
Hundreds, others of us, out here waiting for the same thing...A good thing we have Europe working for us!!
Probably the salvation of hamsats...will catch u there agn!!!
73, Dave, WB6LLO [email protected]
Disagree: I learn....
Pulling for P3E...
----- Original Message ----- From: "Dave Guimont" [email protected] To: [email protected] Cc: [email protected] Sent: Friday, May 02, 2008 6:13 AM Subject: [amsat-bb] Re: P3E was RF connectors in 736R
Hi Domenico,
Yes a long time since we made those contacts. I still have all the 24 GHz receive equipment. The system has been upgraded with a 2 foot dish with circular feed and 1.3 dB nf preamp.
I also have 47 GHz equipment ready.
I can't wait for P3E.
Good, Mike and Dom!
Hundreds, others of us, out here waiting for the same thing...A good thing we have Europe working for us!!
Probably the salvation of hamsats...will catch u there agn!!!
73, Dave, WB6LLO [email protected] Disagree: I learn.... Pulling for P3E...
Hi Dave and Mike
It seems to me that is not correct only Europe is working for the salvation of hamsats producing P3-E
Actually we have a new flock of 10 microsatellites built by the Universities worldwide with the contribution of their governements and private industries.
Actually the Universities are requesting assistance to all of us hamsats to collect TLM for their experiments but to do it we hamsats are using our own equipments in wich we have invested a lot of money.
I wonder if the the above Universities are donating or not some money as a contribution to AMSAT to get P3-E a reality for us.
Best 73" de
i8CVS Domenico
participants (3)
-
Dave Guimont -
i8cvs -
n1jez＠burlingtontelecom.net